Can I Colour These Scratch-Resistant Resins or Add Pigments?

Mica powders and other compatible pigments

The most direct way to add colour is to use the mica powder supplied with a compatible kit. The “Trasparente” Epoxy Resin Kit 800g + Mica Powder 10g – 10 Colour Variations includes that powder and is designed for coloured scratch-resistant finishes. You can also mix in other pigments made for epoxy, but they need to be stirred evenly into the liquid resin rather than applied as a surface layer.

• Mica powder is a practical first choice for soft or vibrant tones.
• Other compatible pigments can shift the colour further, but require careful mixing.
• Always add pigment to the mixed resin, never to the hardener alone.

Mixing for even colour without disturbing the cure

Add pigment in small increments. This makes it easier to control the depth of colour and reduces the chance of dry particles sitting in one area. Stir slowly and vary the direction, using a flat tool to scrape the bottom and sides of the container. A small test batch is worthwhile when you are working with a new pigment or trying to match a specific tone.

Keep the resin and hardener at the manufacturer’s recommended ratio. Pigment is an addition to a correctly measured mix, not a substitute for accurate resin measurement.

When colouring matters

Colouring is useful when a clear pour needs to sit alongside timber, stone or a particular room palette. It also helps with visual features such as coloured edges, inlays or decorative table sections. Because the same scratch-resistant base can be used clear or tinted, you do not have to switch between different resin systems for every colour change.