Can These Epoxies Be Used for Thick Layers?

Layer depth limits at a glance

Not every clear epoxy is designed for deep pours. Icrystal is suitable for applications up to 1.5 cm per layer, which makes it a practical choice when you want a substantial clear coat in one pass. Art Pro is intended for thinner applications from 1.5 mm to 10 mm, making it better suited to fine final coatings or controlled surface work.

Staying within these depth ranges helps the resin cure evenly and reduces the chance of surface defects or uneven curing.

How to build thicker coats safely

When the total depth needed exceeds the recommended single-layer depth, build the coating in stages. Apply one layer within the product’s specified range, let it cure fully, and only then pour the next layer. This staged method is more reliable than attempting one oversized pour and helps maintain a clear, stable finish.

• Check the maximum layer depth on the product before mixing.
• Pour a single controlled layer and allow full curing.
• Prepare or lightly sand between layers if recommended.
• Keep temperature and humidity stable while each layer cures.

When this matters for 3D floors on parquet

Parquet floors have joints, slight levels, and natural timber movement, so layer depth can affect the final appearance. A deeper single pour may help fill small recesses or create a level clear surface, while a thinner-coat resin gives a finer finishing layer that follows the wood profile without adding excessive weight or thickness.

If you are embedding decorative media, pigments, or creating a 3D effect, split the work into a base seal, the decorative layer, and a clear top layer rather than trying to achieve everything in one pour.