What You’ll Need

• “Liquidissima” – Epoxy Resin For Creations & Jewellery – Epoxy resin for artists and intricate jewellery projects.
• “Trasparente” – Multipurpose Clear Epoxy Resin for Casting – Up to 2cm – Versatile resin ideal for castings up to 2cm thick.
• Set of 10 Open Metal Bezels for Jewellery Making and UV Resin Projects – Forms to shape and frame your resin pieces.
• “Evershine Collection” – Artisan Jewellery Epoxy Resin Kit with 100+ Accessories – Complete starter kit for resin jewellery with inclusions.
• Gloves, mixing sticks and cups, silicone moulds, and your chosen inclusions (e.g. dried flowers, glitter, mementoes).

Step 1: Prepare Your Work Area and Moulds

Start by laying down a protective sheet over your workspace to prevent mess or resin spills. Gather all necessary tools and inclusions so everything is within easy reach. Clean your silicone moulds or bezels thoroughly to ensure no dust or residue could mar the clarity of the resin or affect mould release. If you are using metal bezels, check their backs are flat and seal any open spaces with a thin tape layer to minimise leakage.

Ensuring the environment is dry and free from excess humidity will help avoid unwanted cloudiness. If you plan to use open metal bezels, arrange them securely on a non-stick mat before pouring resin.

Step 2: Mix the Resin and Prepare Inclusions

Carefully read the instructions for your chosen resin. For precise and bubble-free results, use a two-part epoxy resin with excellent transparency; options like “Liquidissima” or “Trasparente” are ideal for clear, durable jewellery. Measure components accurately as specified and mix slowly, scraping the sides and bottom of your mixing cup to fully incorporate both parts.

Plan your design and prepare inclusions in advance. Organic items (like dried flowers or leaves) should be thoroughly dried and, if necessary, pre-sealed with a coat of resin or clear varnish to prevent bubbles or discolouration. Lay out your chosen decorative items so they are ready to be placed in the mould or bezel as soon as the resin is poured.

Step 3: Pour Resin and Embed Inclusions

Pour a small amount of mixed resin into the base of your mould or bezel, creating a thin foundation. Use a toothpick or stirring stick to guide resin into tight corners or intricate shapes, ensuring no air gaps remain. Place your inclusions gently onto this layer using tweezers for precision.

Work in thin layers to achieve clarity and minimise bubbles. If needed, pour further resin to fully submerge the inclusions, avoiding overfilling the mould. For more complex pieces, allow the base layer to partially cure, then add inclusions and another resin layer to enhance depth and suspend objects evenly throughout the cast.

Step 4: Cure and Demould Your Jewellery

Cover your filled moulds to prevent dust settling on the surface and let the resin cure as per manufacturer’s instructions—usually from 12 to 48 hours, depending on the product and conditions. Avoid moving or disturbing the moulds during curing time to ensure a perfect finish. Once cured, gently remove the piece from its mould or bezel, taking care not to bend or stress the resin before the full cure is complete.

Certain kits—such as the “Evershine Collection” – Artisan Jewellery Epoxy Resin Kit with 100+ Accessories—provide tools for finishing, including fine-grit sandpaper or a small drill for attaching rings and findings securely.

Tips, Common Mistakes and Troubleshooting

• Seal organic inclusions to prevent moisture-related issues such as bubbles or discolouration.
• Work slowly to avoid introducing extra bubbles; if bubbles appear, gently pop them with a toothpick or use a heat gun from a distance.
• Do not demould before the resin has completely cured—this often leads to warping or tacky surfaces.
• Protect the curing resin from direct sunlight or extreme cold for best clarity and hardness.