Can I Install a Flowstone Permeable Floor Myself?

What the kit provides

The “Flowstone” complete permeable floor kit is supplied by surface area, with the pebbles and resin binder matched to your project. The recommended resin depends on the aggregate colour: a non-yellowing polyurethane suits white aggregates, while a low-yellowing epoxy is used with coloured stones to help preserve the finish.

Full application instructions are included with the resin. If you are working across a driveway or commercial space, consider ordering enough material to complete the whole area in one phase.

Practical installation steps

A straightforward process suits competent DIYers, but surface preparation still matters. Start with a firm, clean base and plan your sections before mixing. For smaller footpaths, hand mixing in a clean tub can work. For larger driveways or parking areas, a cement mixer is recommended to keep the aggregate and resin evenly combined.

• Choose moderate temperatures and avoid very low or very high heat and high humidity.
• Mix only as much as you can lay before the resin begins to set.
• Work in sections and keep the blended material moving to avoid uneven patches.

When this matters

Installing a permeable floor yourself can be a practical way to manage rainwater on driveways, footpaths and patios. It matters most when you need a surface that allows drainage while still standing up to regular use. In commercial settings, the same planning discipline applies: a larger pour with a cement mixer gives a more consistent mix across the area, reducing the chance of weak spots or resin-rich patches.