Primer for Floor Installation

Choosing Between Epoxy, Methacrylic, and Polyurethane Primers

Epoxy primers offer versatility and eco-friendliness for a wide range of indoor surfaces, excelling on concrete and screeds. Methacrylic resins such as Resinstone are particularly strong on outdoor concrete, rapidly sealing and protecting against the elements. Polyurethane coatings like Prolux provide the ultimate combination of abrasion, UV, and weather resistance, ideal for high-traffic, driveable, or specialist environments.

“Epoxyprimer” – Universal Water-Based Two-Component Epoxy Floor Primer

The “Epoxyprimer” – Universal Water-Based Two-Component Epoxy Floor Primer is formulated for maximum flexibility and broad compatibility. Maximises bonding between the substrate and epoxy coatings, making it suitable for concrete, ceramic tiles, timber, and screeds. Its water-based, odourless formula is eco-friendly, ensuring safe indoor use. Ideal as a base for epoxy resin flooring, application is accessible to professionals and DIY users alike with roller, brush, or spatula. It requires 24–48 hours to cure completely and covers 100–300 g/m² depending on the porosity of your surface.

Choose this primer when preparing surfaces for epoxy flooring in homes, commercial spaces, or workshops, ensuring a robust and stable finish that resists failure over time.

“Resinstone” – One-Component Methacrylic Resin for Concrete Floors and Driveways

For outdoor projects and driveways, “Resinstone” – One-Component Methacrylic Resin for Concrete Floors and Driveways delivers strength and fast results. Prevents moisture penetration while remaining breathable, making it perfect for garages, patios, and outdoor paths. This primer safeguards concrete against chemicals, UV rays, and weathering, while drying in less than 12 hours for rapid project turnaround. Not recommended for use as a binder on loose gravel.

If you need to seal, reinforce, or upgrade outdoor concrete before applying further coatings or for standalone protection, this methacrylic resin is both easy to use and long lasting.

“Flowstone” – Complete Permeable Floor Kit with Pebbles and Resin

For creative, functional outdoor floors that require drainage, “Flowstone” – Complete Permeable Floor Kit with Pebbles and Resin is an all-in-one system. Delivers a permeable, decorative finish on outdoor floors such as driveways, footpaths, and patios, allowing water to drain through and reducing puddling. Each kit is tailored by area required and comes with simple instructions, making it accessible for large DIY projects and contractors alike. The kit includes resin guidance for different aggregates to ensure lasting colour and durability.

This is the go-to kit for modern outdoor spaces where aesthetic, function, and compliance with drainage requirements matter.

“Prolux” – PU Coating for Tiles, Concrete, Plastic and Metal – Suitable for Driveable Surfaces

“Prolux” – PU coating for tiles, concrete, plastic and metal – suitable for driveable surfaces is a robust, two-component polyurethane that stands up to the toughest challenges. Provides a UV- and abrasion-resistant finish for heavy-use areas, from industrial floors to garages and parking spaces. Available in gloss or satin and any RAL colour, it is CE marked and straightforward to mix (2:1 ratio). Application requires careful surface prep but rewards the user with exceptional durability, making it an ideal finishing layer where reliability is non-negotiable.

Choose Prolux for floors needing intense protection from traffic, chemicals, and the British climate, indoors or outdoors.

Tips for Flawless Floor Priming and Installation

Careful surface preparation, temperature management, and product selection are crucial for long-lasting floor installations. Always confirm substrate compatibility and dryness before priming, apply evenly, allow for recommended curing times, and consider weather if working outdoors. Using the right primer enhances both the strength and appearance of your final floor finish.