Strong Bonding for Stone, Metal and Cement Repairs

← Back to Multi-material waterproofing agent

Strong bonding for stone, metal and cement repairs is achieved with a thixotropic epoxy mastic that grips vertical surfaces without sagging while remaining resistant to UV and weather exposure. Formulated as a two-component putty mixed in a 100:50 ratio, it bonds natural and artificial stone, metal, and cement, including granite, marble and engineered stone. The minimum application temperature is 10°C, and small-batch preparation supports precise repairs in interior and exterior settings.

This type of epoxy mastic is positioned for restoration work where a runny adhesive would fail. Because it stays in place on upright stone or metal sections, it is a practical choice for masonry and renovation repairs that need to be weather-stable rather than just indoor fillers.

Why a thixotropic epoxy mastic works

For stone, metal and cement repairs, Magelstick epoxy mastic is formulated to hold its position on vertical faces, so it can fill gaps and bond edges without sliding before cure.

Bonds natural and artificial stone, including granite and marble
Suitable for metal and cement surfaces
Thixotropic consistency prevents running on vertical installations
Minimal shrinkage supports a smooth, intact finish

Outdoor use and weather resistance

Outdoor repairs need more than a strong initial grab. This epoxy mastic is UV and weather resistant, which supports use in exterior settings where bonded joints face sunlight, rain and temperature changes.

It is also suitable for interior work, but the outdoor capability is particularly relevant for stone sills, gate posts, metal railings and cement steps. Always check that the application temperature is at least 10°C before starting an exterior job.

When outdoor bonding matters

This matters when a repair has to hold on an upright or overhead surface, or when the repaired area sits outside all year. Standard adhesives may run or soften, while a non-sag epoxy mastic keeps the repair aligned during curing and remains weather-stable once set.

Related guides

Multi Material Waterproofing Agent

For multi-material work, the same principle applies: choose a resin or mastic matched to the surface rather than forcing a general-purpose product across stone, metal and cement. That approach supports longer-lasting waterproofing and repair outcomes across a broader range of materials.