Best Resin for 9.7cm High, 4cm Wide Castings

← Back to How to protect resin from heat?

Which resin is suitable for castings 9.7cm high and 4cm wide?

If you’re planning a resin casting project with dimensions around 9.7cm high and 4cm wide, selecting the right epoxy is crucial for clarity, strength, and safety during pouring.

Recommended Resin Choices for Deep Castings

For castings under 10cm thick, such as those 9.7cm high and 4cm wide, opt for a deep pour resin formulated for larger volumes. Epoxytable 10-Ten is specifically designed for deep pours, allowing you to cast in one step up to 10cm if temperature and curing conditions allow. This minimises the risk of unmixed layers and ensures a bubble-free, crystal-clear finish. For more economical or slightly shallower castings, Epoxytable Five is an alternative worth considering.

Practical Pouring Advice

When working with casts of this size, always monitor the resin temperature during mixing and pouring. Deep wall castings can generate excess heat if the resin has a fast exotherm, potentially causing defects. Using a low-exothermic resin like Epoxytable 10-Ten helps to prevent overheating. For exceptionally tall forms, consider pouring in two stages to further control cure temperature and reduce stress on the mould.

When This Matters

Choosing the right resin is particularly important for decorative pieces, functional art, or tables where clarity and durability matter. Deep pour resins are formulated to avoid yellowing and to set slowly enough for heat to dissipate, protecting both your artwork and the mould.

Related guides

Selecting an appropriate resin like Epoxytable 10-Ten for your deep casting needs helps ensure both safety and stunning results. For more tips on keeping your resin projects in top condition, visit our main guide on how to protect resin from heat.