What Thickness of Resin Should I Use for My Desk?

Recommended Resin Thickness for Desks

For most resin and wood desk projects, a pour depth of up to 5cm is a solid choice, giving you enough thickness for style, strength, and embedded decorations. For extra-deep or dramatically layered looks, resins specifically formulated for up to 10cm in a single pour can be used, but be sure your project design justifies this amount of material.

If your pour exceeds 5cm, ensure you’re using a deep-pour epoxy such as Epoxytable 10-Ten. Many makers achieve their desired thickness through multiple layers, giving time for each one to cure and helping to avoid overheating or bubbles.

Practical Tips for Pouring Resin

Always confirm your resin type is suitable for the depth you intend to pour. Standard tabletop resins often cannot handle thick pours without risk of yellowing or incomplete curing. Deep-pour epoxies are designed for minimal heat build-up and clearer results in thicker layers.

• Use formwork that can withstand the pressure from deep pours.
• Allow each layer to cure before pouring the next to minimise defects.
• Measure your space: most desks look best with a visible resin edge of at least 2-5cm, particularly for river table styles.

When This Matters

Choosing the right thickness is crucial if you are embedding objects or want a dramatic ‘river’ feature. Thicker pours allow more creativity with layers and inclusions but do require careful product selection for safety and stability.