FAST EPOXY RESIN “iCreation” (TRANSPARENT) 1,5 KG [3,30 LB] – Catalyzes in HALF the time!
+ the black nitrile gloves AS A GIFT!
Highly reactive reduced-yellowing transparent epoxy resin for silicone moulds. Professional product specifically designed for jewellery production and artistic creations. Developed to ensure the advantages of epoxy resin (transparency, hardness, shininess) but with shorter curing times compared to traditional resins.
Thanks to its special formulation, you can remove your models after 6h00’. The catalysis times are also sensitive to external factors, such as temperature. The higher the temperature, the faster the catalysis. Furthermore, the product can be removed from the silicone moulds after 8 hours, but reaches its maximum hardness (not deformable) after 24-48h.
As for all the other epoxy resins, using tempera or acrylic enamels in percentages higher than 1%, can damage the mechanical strength of the creation. Because of its high-speed catalysis, the product may heat up for a few minutes, even to high temperatures, when applied on surfaces of a thickness of 10 mm [0,39”] or more. Therefore, the casting should never be touched before 1-2 hours. If you require greater thicknesses, we recommend our Liquidissima product (up to 30 mm [1,18”]) or the Transparent Epoxy Resin Product (up to 20 mm [0,78”]). Working time is 10′-15′ for quantities up to 30 gr [0,06 lb]. We recommend to mix for 2 minutes and then apply. Prepare max. 100 gr [0,22 lb] of product at a time to prevent the resin from pre-catalysing before application. Application ratio by weight 100:50.
Description: “I-CREATION” Highly Reactive Transparent Epoxy Resin / 1,5 KG [3,30 LB] – Water-Clear – Two-component epoxy system (composed of 1 kg [2,20 lb] of resin and 500 gr [1,10 lb] of hardener)
with high transparency and excellent UV stability for film application (1 mm [0,03”]) and castings up to 10 mm [0,39”] thickness. In addition to the high transparency (water-clear) and the self-levelling properties, it guarantees an excellent mechanical seal for long-lasting items. The product features a low viscosity that reduces the appearance of unaesthetic air bubbles after hardening. The excellent resistance to ambient humidity guarantees a glossy and transparent surface. The product is compatible with the major colouring pastes on the market. Application ratio by weight 100:50. Highly reactive Transparent Epoxy resin is a two-component product based on epoxy resins and relative amine hardener.
The main features of this product are:
+ high transparency,
+ excellent mechanical strength,
+ good chemical and carbonation resistance,
+ high-speed catalysis,
+ glossy and self-levelling surface.
The product can be coloured with any epoxy dye (both in paste and powder) in a percentage ranging from 0.1% to 2.0%. It can also be thickened by the use of aggregates such as powders and fumed silica.
Thanks to these features, the Epoxy resin with another “I-CREATION” reactivity is ideal for the following applications:
+ Artistic creations;
+ Fast prototyping
+ Jewellery,
+ Modelling;
POT-LIFE (150 gr at 30 C) [0,33 lb at 86 F]: 10′,
WORKING TIME (30 gr at 25°C) [0,06 lb at 77 F]: 15′-20′,
FULL CATALYSIS AFTER: 24H,
FILM CATALYSIS (1 mm at 30 C) [0,03” at 86 F]: 6H 00′,
MASS CATALYSIS (25°C) [77 F]: 30g: 3h00′, 15g: 4h00′.
Maximum pouring level: 1.5 cm
Minimum pouring level: 1.5mm
How to use. Mix ratio based on weight – 100:50.
For best results, measure two components based on weight using a scale within 5% of the recommended mix ratio.
- Always mix the product thoroughly for at least 2 minutes, scraping all the surfaces of the container to ensure complete mixing.
- Try to use the product in a temperature-controlled environment within the optimal product specifications.
- Avoid high humidity or low ambient temperatures.
- Ensure that the surface is dry and any dirt, dust and oils removed to achieve optimal bonding. It is furthermore highly recommended to sand the surface (with sandpaper or mechanical preparation).
- Perform small preliminary tests to have a clear understanding of the polymerization features of the resins in your work environment and the compatibility of the resins with other materials.
WARNINGS:
During processing, use protective masks, gloves, and other protective clothing.
In case of contact with eyes, immediately rinse with cold water for 15 minutes and immediately consult a doctor.
