Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to Epoxy Resin for River Tables and Wood Projects
Preparing your surface thoroughly is the first step to a successful deep pour resin project, whether you’re creating a river table or a striking wood feature. Well-prepped materials ensure lasting clarity and adhesion for your finished work.
Key Steps for Effective Surface Preparation
Start with a level, stable base and make sure your wood components are fully dry. Any traces of moisture, oil, or dust left on the surface can compromise the resin’s ability to bond, and can cause discolouration or bubbles during curing. Carefully sand and clean all wood, paying special attention to any knots or textured grain.
- Check the wood is completely free of dust and oils.
- Where supplied, use release film or silicone to line your base for easy removal.
- Inspect your formwork for gaps to prevent resin leaks.
Sealing Edges and Formwork
Properly sealed edges are essential for clean deep pour results. Apply a flexible sealant like silicone along all joins and edge zones to protect from leaks and resin absorption. Release films are helpful for lining the base and sides, as they ensure demoulding is quick and clean without damaging your piece.
If you’re working with a kit like the “River-Table” Complete Kit, you’ll find supplied sealant and films included. This takes the guesswork out of the prep and helps create a strong, crisp edge on your final table.
When Careful Preparation Really Matters
Proper surface prep is especially important for pours thicker than 2cm, where leaks or trapped debris become noticeable in the finished resin. Taking time on these steps helps ensure a bubble-free, clear result and prevents costly mistakes as resin sets.
Related products
Thoroughly preparing your wood and formwork will set the stage for impeccable resin pours. For more tips and inspiration on working with epoxy resin, explore our main Epoxy Resin for River Table and Wood Projects hub page.