How to Remove Bubbles from Epoxy Resin Finishes

Q: Effective Methods for Removing Bubbles

After pouring: As soon as you’ve poured your resin, small bubbles will start to rise to the surface. Use a heat gun or a torch, gently moving it over the resin to pop the bubbles. Take care to keep the tool moving and avoid holding it too close, which could mark or overheat the resin. During mixing: Mix the resin and hardener slowly and steadily to minimise air entrapment. Letting your mixed resin rest for a couple of minutes before pouring can allow some bubbles to escape naturally. Surface coatings: For a bubble-free clear coat, consider products like Art Pro Clear Epoxy Resin , which is formulated for self-levelling and smooth finishes.

Q: Prevention and Helpful Tips

Prepare your workspace: Ensure your workspace and materials are at a stable, room temperature—extremes in heat or cold can worsen bubbles. Seal porous surfaces: Wood or other porous materials should be sealed before your main resin pour, as trapped air from such surfaces can cause bubbling. Finishing layers: After removing bubbles and curing, apply a suitable lacquer like the 2K Clear Coat Lacquer for added protection and high-gloss shine.

← Back to How to apply spray cork and resin products?

Bubbles are a common issue when working with epoxy resin, often detracting from the smooth, glass-like results you’re after. Fortunately, a few simple techniques can help you achieve a flawless finish on your creative projects.

Why Do Bubbles Appear in Epoxy Resin?

Bubbles usually form during the mixing process or as you pour resin over a surface. They may occur if you mix too vigorously, trap air, or pour onto a surface that’s not completely dry. Temperature changes can also draw bubbles up from beneath the resin layer.

Effective Methods for Removing Bubbles

After pouring: As soon as you’ve poured your resin, small bubbles will start to rise to the surface. Use a heat gun or a torch, gently moving it over the resin to pop the bubbles. Take care to keep the tool moving and avoid holding it too close, which could mark or overheat the resin.
During mixing: Mix the resin and hardener slowly and steadily to minimise air entrapment. Letting your mixed resin rest for a couple of minutes before pouring can allow some bubbles to escape naturally.
Surface coatings: For a bubble-free clear coat, consider products like Art Pro Clear Epoxy Resin, which is formulated for self-levelling and smooth finishes.

Prevention and Helpful Tips

Prepare your workspace: Ensure your workspace and materials are at a stable, room temperature—extremes in heat or cold can worsen bubbles.
Seal porous surfaces: Wood or other porous materials should be sealed before your main resin pour, as trapped air from such surfaces can cause bubbling.
Finishing layers: After removing bubbles and curing, apply a suitable lacquer like the 2K Clear Coat Lacquer for added protection and high-gloss shine.

When This Matters Most

Removing bubbles is especially important for projects such as coasters, trays, and decorative art where clarity and surface smoothness are key to a professional appearance.

Related guides

How To Apply Spray Cork And Resin Products

Maintaining a bubble-free resin finish is vital for showcasing your resin projects at their best. For more detailed guidance on application techniques, see our main guide on how to apply spray cork and resin products.