Free shipping on orders over £29,85 
Shipping Tracking! 
Google
FacebookHow do you wash resin?
Practical techniques for cleaning and restoring resin
Washing resin can make all the difference to the appearance and longevity of your finished piece, whether you are cleaning up after a casting, prepping a surface for its next phase, or looking to restore a glossy shine. Knowing the right methods helps you achieve a streak-free, undamaged look and keeps your workspace and artwork in top condition.
What You’ll Need
- Pure Isopropyl Alcohol 99.9% – 1000ml Bottle for Epoxy Resin Projects & DIY – removes bubbles and surface residue.
- Strong Technical Degreaser for Resin Projects – 100% Natural Formula – for breaking down grease and tough marks.
- “Epoxy Polish” – Epoxy Resin Polishing System – for restoring shine after cleaning.
- Soft, lint-free cloths
- Gloves for hand protection
- Clean water (if needed for rinsing)
Essential Cleaning Tools in Action
See each cleaning product’s role – from dissolving tough grease to restoring brilliant polish – as part of a safe resin washing routine. Proper tools protect your resin’s finish and save valuable project time.
Step 1: Remove Dust and Loose Particles
Begin by ensuring your resin surface is free from dust, shavings, or loose material. Use a dry, lint-free microfiber cloth to gently wipe the area. This minimises the chance of scratching when you use wet cleaners later. If the project is intricate, a gentle air blower can help dislodge stubborn particles from grooves and corners without any abrasion.
Step 2: Degrease and Clean the Surface
After dusting, inspect the resin for fingerprints, oil, or stubborn marks. For sticky residues or grease, apply a specialised cleaning agent designed for resin surfaces, such as the Strong Technical Degreaser for Resin Projects – 100% Natural Formula. Spray directly onto the affected spots, let it sit briefly, and then wipe clean with a soft cloth.
Rinse thoroughly with clean water after degreasing to ensure no residue from the cleaning product remains. Allow the surface to air dry completely or gently pat it dry using a new lint-free cloth.
Step 3: Target Specific Resin Residues or Bubbles
For resin that retains a tacky surface or bubbles after curing, a high-purity solvent can help. Dampen a clean cloth with a product such as Pure Isopropyl Alcohol 99.9% – 1000ml Bottle for Epoxy Resin Projects & DIY and gently wipe the resin. This method is especially effective for removing fine traces of uncured or sticky resin and for smoothing over pitted areas caused by bubbles. Always use alcohol in a well-ventilated area and never near heat sources, as it is highly flammable.
Avoid using abrasive pads or harsh chemicals that may scratch the resin. Excess friction or the wrong type of cleaning agent can dull the surface or cause cloudiness that is difficult to reverse.
Step 4: Restore Shine with Polishing
After thorough washing, your resin may benefit from a revitalising polish. Use a dedicated polishing product, like the “Epoxy Polish” – Epoxy Resin Polishing System. Apply as directed, using a polishing pad or rotary polisher for larger surfaces, or a soft cloth for smaller areas. Work in small sections and use light, even pressure. The result is a fresh, glossy surface that looks as good as new.
Polish gently for a renewed glossy finish. Overworking a single area can lead to swirl marks or uneven gloss levels.
Tips, Common Mistakes, and Troubleshooting
Consistency is key – always use gentle, non-abrasive cloths and avoid excessive scrubbing. Wear gloves to prevent oil transfer from your hands to the resin. If streaks appear after cleaning, buff lightly with a clean, dry cloth. Should the resin surface develop cloudiness, this may be due to residue left from previous cleaning products – re-wash with pure isopropyl alcohol and allow it to dry fully before polishing. Store your cleaning agents away from direct sunlight and sources of heat for safety and efficacy.
Expert Washing Results
Efficient washing and careful finishing make resin surfaces shine like new. Choose the right steps for spotless surfaces and lasting clarity with every project.
- Pure Isopropyl Alcohol 99.9% – 1000ml Bottle for Epoxy Resin Projects & DIYPrice range: £9.85 through £19.85Pure Isopropyl Alcohol 99.9% is used in epoxy resin projects to remove bubbles and help create effects, supporting resin washing techniques.
- Strong Technical Degreaser for Resin Projects – 100% Natural FormulaOriginal price was: £10.00.£8.85Current price is: £8.85.A natural, hypoallergenic degreaser suitable for cleaning various surfaces including those in epoxy resin projects.
- "Epoxy Polish" – Epoxy Resin Polishing SystemPrice range: £17.85 through £44.85Epoxy Polish delivers a glossy finish and restores resin surfaces to a mirror-like shine efficiently.
Frequently Asked Questions
Can you clean resin safely at home?
Yes, with the right cleaning agents and by avoiding abrasive materials, resin surfaces can be safely cleaned in any home workspace.
What should I avoid when washing resin?
Avoid harsh chemicals, abrasive pads, and excess friction, as these can scratch, cloud, or dull resin surfaces.
How do I remove sticky or uncured resin after curing?
Use a soft cloth dampened with pure isopropyl alcohol to gently wipe away tacky residues from cured resin projects.
What type of cloth is best for washing resin?
Always use a lint-free, non-abrasive microfiber cloth to protect the resin surface from scratches and dust.
How often should I polish resin surfaces?
Polish only when the resin appears dull or scratched. Over-polishing is unnecessary and may wear the surface.
Can I use household cleaners on epoxy resin?
Most household cleaners are not suitable for resin, as they may cause damage or leave residues. Use products formulated for resin.