What You’ll Need

• Strong Technical Degreaser for Resin Projects – 100% Natural Formula: A natural, solvent-free degreaser gentle on skin and effective against resin residues.
• Pure Isopropyl Alcohol 99.9% – 1000ml Bottle for Epoxy Resin Projects & DIY: Useful for removing resin before it cures.
• Nitrile Gloves – 50 Pairs (100 Pieces): Chemical resistant gloves for future hand protection.
• Warm water and mild soap
• A soft cloth or paper towel

Step 1: Act Quickly with Warm Water and Soap

Epoxy resin is much easier to remove from your hands before it cures. Immediately after coming into contact with resin, rinse your hands under warm water. Use a mild soap to help break down the surface layer of the uncured resin. Gently lather and rinse several times to remove as much residue as possible without irritating your skin.

Avoid very hot water, as this can cause the resin to bond more tightly to the skin or lead to discomfort. If any sticky patches remain after washing, move to a more targeted cleaning method.

Step 2: Use a Natural Degreaser for Stubborn Residues

If water and soap alone are not effective, apply a specialised cleanser. Use a natural, solvent-free degreaser such as the Strong Technical Degreaser for Resin Projects – 100% Natural Formula for gentle but powerful cleaning. Pour a small amount onto a soft cloth or directly onto your hands.

Gently rub affected areas in circular motions until the residue loosens. Rinse thoroughly with warm water and wash again with mild soap to ensure all residue is removed. This method is suitable for sensitive skin as it avoids harsh chemicals.

Step 3: Removing Cured or Persistent Epoxy With Care

For resin that has already begun to set but is not fully cured, applying a small amount of Pure Isopropyl Alcohol 99.9% – 1000ml Bottle for Epoxy Resin Projects & DIY with a cloth may help lift stubborn residue. Dab lightly onto the area, let it sit for a few seconds, and then wipe away with a soft towel. Wash your hands afterwards with soap and water to remove any remaining alcohol or resin particles.

Avoid harsh scrubbing or solvents like acetone, as these can damage skin and cause dryness or irritation. If resin remains, repeat the previous step rather than increasing chemical strength.

Tips for Safer Handling and Future Protection

Prevention is always the best approach when working with epoxy resin. Wear nitrile gloves when handling resin, as these provide a chemical-resistant barrier and help protect against accidental spills or drips. Keep your workspace organised to minimise skin exposure and have cleaning products readily accessible.

If you do get resin on your skin, address it promptly before it hardens to reduce risk of irritation. Never use abrasive materials or bleach to remove resin. Moisturise your hands after cleaning to maintain healthy skin.