How to Measure and Mix Epoxy Resin for Furniture Coating

Why Accurate Measurement Matters

Epoxy resin must be combined in the exact ratio specified by the manufacturer. Even small errors lead to improper curing, sticky surfaces, or reduced durability. For instance, EpoxyTable 5-Five requires 100 parts resin to 55 parts hardener for best results. Always check product instructions as ratios can vary between resins designed for thin or thick applications.

Step-by-Step Mixing Advice

• Use dedicated measuring jugs and mix on a level surface to guarantee accuracy.
• Pour resin and hardener separately, measuring each to the exact requirement.
• Combine both parts in a clean container, stirring slowly and thoroughly—usually for at least 3-5 minutes. Scrape the sides and bottom as you go to ensure a homogeneous mixture.
• Avoid whipping air into the mix to prevent bubbles. If the instructions recommend, transfer to a second container midway for even mixing.

Selecting the Right Epoxy for Your Project

Your choice of resin affects measuring and mixing. For coatings under 2cm, Trasparente is ideal. Thicker coatings up to 5cm are best tackled with a deep pour resin like EpoxyTable 5-Five, which allows careful mixing without rushing due to its longer working time. For projects needing ultra-fine detail or minimal odour, Icrystal resins offer a user-friendly solution.