Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to how to make a custom resin helmet
A polyurethane resin helmet is a versatile base for creative custom finishes. If you’re wondering whether you can paint it, the answer is yes—once fully cured and properly prepared, your resin helmet can be customised with paints and decorative details.
Preparing Your Resin Helmet for Painting
Before you reach for your brushes or spray cans, ensure the helmet is fully cured—this usually means at least 24 hours after demoulding, or as guided by your product’s instructions. It’s best to lightly sand the surface with fine-grit sandpaper to remove any gloss or residue, helping the paint adhere evenly. Clean the helmet thoroughly to eliminate dust and oils before painting.
Choosing the Right Paint and Method
Most acrylic-based paints, spray paints, or airbrush colours will work well for decorating a polyurethane resin helmet. For optimal results, apply a plastic primer as a base coat; this helps avoid peeling or uneven finishes. Multiple light coats produce the smoothest coverage, and leave each layer to dry completely before the next. For complex designs or weathering, masking tape and stencils can add detail without smudging.
When Careful Preparation Matters Most
Painting is best started only after confirming the helmet’s surface is free of tackiness and fully sanded. Rushing the curing or skipping prep can lead to cracking, blemishes, or poor adhesion. If you’re casting your helmet from a product such as Polyform – Polyurethane Casting Resin, the high detail and quick set help ensure a smooth, paintable finish when handled with care.
Related products
Related guides
Bringing colour and character to your resin helmet is a satisfying final step in the customisation process. For more guidance and inspiration at every stage of creating your own helmet, see our complete guide on how to make a custom resin helmet.