Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How to polish epoxy resin by hand
Before you begin polishing your epoxy resin project, it’s essential to make sure the surface is completely free of any sanding dust, grease, or other contaminants. Proper residue removal paves the way for a smooth, glossy finish and avoids unwanted cloudiness during polishing.
Why Residue Removal Is Vital
If sanding residue or oils remain on the surface, polish adhesives may not work as intended. This can lead to patchiness or hazing, rather than the high-gloss clarity you’re aiming for. A clean substrate ensures your chosen epoxy resin polish forms a uniform, streak-free layer during application.
Cleaning Steps for Best Results
- Wipe away dust: After sanding, carefully remove dust using a dry, lint-free cloth or a gentle vacuum with a soft brush attachment.
- Degrease if needed: For surfaces that may have fingerprints or oils, use a resin-safe cleaning solution or diluted isopropyl alcohol. Lightly moisten a clean cloth and wipe over the surface, then allow it to fully dry.
- Inspect carefully: Hold the work up to the light—any haze or specks must be removed before proceeding.
When This Step Matters Most
Meticulous residue removal is especially important with high-gloss or mirror finishes and when using specialist products such as the Ebonite Abralon Sanding Pads. Any leftover debris will be highlighted once polish is applied, so patience at this stage ensures professional-looking results.
Related products
Related guides
Caring for the surface before polishing sets your epoxy resin project up for success. For further tips and to explore trusted polishing kits, return to our guide on how to polish epoxy resin by hand.