Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How to make a mirrored piece in resin?
Mirrored resin projects demand extra care when removing them from their mould to preserve their reflective finish. Here are sensible ways to demould safely and keep your work pristine.
Check Full Cure Before Demoulding
One of the most important steps is verifying that your resin has completely cured. Attempting to remove your piece early can result in fingerprints, bends, or a dull surface. Most resins require between 24 to 48 hours to cure fully, though some may take longer depending on ambient temperature and layer thickness. Always refer to the instructions of your chosen resin, like “Trasparente” Multipurpose Clear Epoxy Resin for specifics.
Choose the Right Mould and Use Release Aids
Silicone moulds are ideal for mirrored resin work, as their flexibility allows gentle removal with less risk of surface marring. If using a rigid mould, apply a compatible mould release agent beforehand to help the piece release smoothly and prevent sticking or fracturing along edges.
Slow and Gentle Demoulding Technique
Patience is critical during the demoulding process. Gently flex the mould away from the resin, starting at the edges and working around evenly. If any resistance is felt, do not force the piece out—try working a little at a time or leave it to rest for a few more hours. Rapid pulling or bending can damage the mirrored effect, so always proceed slowly.
When Safe Demoulding Matters Most
- If your piece features metallic foils, pigments, or an intentionally high-gloss finish
- When working with detailed or delicate castings
- For large or thick pours where the mirrored effect is prominent and surface integrity is crucial
Related products
Related guides
By taking a careful approach to demoulding, you protect the gloss and clarity of mirrored resin projects. For more guidance on mirrored resin techniques, explore our main article on how to make mirrored pieces in resin.