Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How to remove bubbles in a river table or a large pour without a vacuum pump?
Bubble removal is essential for clear, smooth resin pours, especially in river tables or deep castings. Many crafters reach for a heat gun as a practical alternative to a vacuum pump, but is it safe?
How Heat Guns Work for Resin Bubbles
Heat guns gently warm the resin surface, causing trapped bubbles to rise and escape before the epoxy sets. They can be especially effective with low-viscosity products and larger pours, like those used in river tables. A model such as the 1500W Heat Gun for Crafting and Epoxy Resin Projects provides adjustable heat control, helping you target bubbles with precision.
Safe Techniques for Bubble Removal
- Keep the nozzle moving at all times to avoid concentrated heat in one spot.
- Use the lower heat setting for most resin projects to prevent distortion or scorching.
- Hold the heat gun at an appropriate distance, just close enough to affect surface bubbles—typically about 5–8cm above the resin.
Excessive heat, especially if applied in one area for too long, can cause the resin to warp, yellow, or even crack. Practice patience and work methodically for best results.
When This Matters Most
If you’re working with deep or large-area pours, such as river tables, achieving bubble-free clarity is crucial. A heat gun offers more control than a torch, especially with resins like “Epoxytable 10-Ten” designed for deep casting, minimising risk when no vacuum pump is available.
Related products
Related guides
Used thoughtfully, a heat gun can safely and effectively remove bubbles from resin projects, making it a valuable tool for those tackling river tables or any large pour. For more methods and tips on achieving flawless resin finishes, explore our guide to removing bubbles in river tables and large pours without a vacuum pump.