What You’ll Need

• Pure Isopropyl Alcohol 99.9% – 1000ml Bottle for Epoxy Resin Projects & DIY – effective for removing fresh resin residue and cleaning surfaces.
• Strong Technical Degreaser for Resin Projects – 100% Natural Formula – great for breaking down grease, oils, and silicone-based contaminants on a wide range of surfaces.
• Lint-free cloths or paper towels
• Nitrile gloves
• Protective eyewear

Step 1: Prepare Your Workspace and Tools

Always begin by protecting your workspace with a disposable cover or silicone mat. Place all your cleaning supplies within reach, and ensure good ventilation to minimise exposure to fumes from cleaning agents. Always wear nitrile gloves and suitable eye protection to prevent skin contact and accidental splashes during the cleaning process.

Step 2: Remove Excess Epoxy Resin Dilution

Wipe off as much wet or semi-cured resin dilution as possible using a disposable cloth or paper towel. Take care not to smear the residue further onto other items, and dispose of used wipes in line with your local chemical waste guidelines.

Step 3: Clean with Isopropyl Alcohol or Degreaser

Apply a small amount of Pure Isopropyl Alcohol 99.9% to a lint-free cloth and gently wipe all areas affected by the resin dilution. The high purity of this alcohol helps lift and dissolve fresh residues efficiently, avoiding sticky build-up. For stubborn grease, oils, or silicone residue, use the Strong Technical Degreaser, working it into the surface as per the product instructions. Both products dry quickly and do not leave behind unwanted smears.

Step 4: Let Surfaces Dry and Inspect for Residue

After cleaning, let the tools or surfaces air dry completely. This ensures that any solvent evaporates before handling or using the cleaned items. Double-check for lingering haze or sticky spots; if necessary, repeat the process with a fresh cloth and additional cleaning fluid until all traces of dilution are removed.

Tips and Solutions for Common Cleaning Mistakes

Never mix different cleaning agents on the same surface, as this may cause unpredictable reactions. Work in a well-ventilated area away from heat or flames when using isopropyl alcohol, as it is highly flammable. Avoid using abrasive materials that may scratch tools or worktops. If residual resin persists, gentle repeated application is safer than scrubbing aggressively.