What You’ll Need

• Nitrile Gloves – 50 Pairs (100 Pieces): Provides essential protection when handling chemicals and resin-contaminated fabric.
• Pure Isopropyl Alcohol 99.9% – 1000ml Bottle for Epoxy Resin Projects & DIY: Excellent for breaking down and removing uncured or semi-cured resin from textiles.
• Strong Technical Degreaser for Resin Projects – 100% Natural Formula: A gentle but effective solution to lift resin residues without harming fabrics.
• Clean, absorbent cloths or paper towels
• Room-temperature water and mild detergent
• Soft brush (optional for stubborn stains)

Step 1: Act Quickly and Stay Safe

Act quickly before the resin cures onto fabric fibres for the best outcome. As soon as you notice the spill, put on nitrile gloves to shield your skin from chemical exposure. Remove the garment and keep the stained area away from other laundry to avoid spreading.

Ideally, deal with resin stains while still wet or tacky. Hardened resin is far tougher to remove, so avoid letting it dry if you can.

Step 2: Blot and Remove Excess Resin

Laying the garment on a flat surface, use a clean cloth or paper towel to gently blot up as much wet resin as possible—do not rub, as this can force resin deeper. Carefully lift away surface residue to make the next cleaning steps more effective.

Step 3: Break Down Resin Stains

For uncured or semi-cured resin, apply a small amount of pure isopropyl alcohol directly to the stain. Let it sit for several minutes—this helps break down the resin bond. Use a clean cloth to blot the area again, lifting the dissolved resin away each time until the stain lightens.

On cured resin, gently scrape off any hardened residue with a blunt edge before using liquid solutions. Isopropyl alcohol can work on some epoxy resins, but particularly stubborn spots might benefit from a natural technical degreaser to further soften and lift the residue from fabric fibres.

Step 4: Wash the Garment Properly

After removing as much resin as possible, launder the clothing in cold or lukewarm water with mild detergent. Check the stain before drying; repeating the alcohol or degreaser process may be needed for persistent marks. Never use hot water, as it can set any remaining resin.

Allow the item to air-dry. Heat from a tumble dryer may cause any lingering resin to cure fully and become permanent.

Tips and Common Mistakes to Avoid

• Always protect your skin by wearing gloves during the process.
• Test on an inconspicuous area first to check for colourfastness and fabric reaction to isopropyl alcohol or degreaser.
• Work in a well-ventilated space when using alcohol or cleaning solutions for safety.
• Never rub the stain aggressively—this spreads resin and can damage fabric fibres.
• If needed, repeat treatment rather than applying too much chemical at once.