What You’ll Need

• “Art Pro” – Clear Epoxy Resin for Artists and Surface Coating: Ideal for surface coatings on art, coasters, and decorative trays.
• “Trasparente” – Multipurpose Clear Epoxy Resin for Casting – Up to 2cm: For casting and thicker layers up to 2cm (e.g. tables, detailed moulds).
• “Trasparente” Epoxy Resin Kit 800g + Mica Powder 10g – 10 Colour Variations: All-in-one kit with powder pigments for coloured effects.
• “Icrystal” – Clear Epoxy Resin – Odourless Formula – Up to 1.5cm: Odourless, user-friendly for indoor projects requiring a clear layer.
• Disposable mixing cups
• Protective gloves
• Mixing sticks or spatula
• Level, dust-free work surface
• Protective covering for the workspace
• Optional: Moulds for casting, heat gun / torch for bubbles

Essential Equipment and Workspace Setup

Set up your workspace with care—ensure all surfaces are clean and level, gather all mixing tools and protective materials, and use gloves for safe handling. Lay out a dust-free area to prevent imperfections in your transparent resin finish.

Step 1: Prepare Your Workspace and Materials

Always work in a well-ventilated space and wear protective gloves. Transparent Pro resin is easy to handle but safety always comes first. Lay down a protective sheet to catch drips, and make sure your work surface is level to achieve an even pour.

Organise all materials before you begin, and ensure that your workspace is dust-free—fine dust can settle on resin and ruin the finish. If you’re using moulds, clean and dry them in advance. For surface coatings, clean and degrease the base material before resin application.

Step 2: Measure and Mix the Resin Correctly

The key to a flawless result is precise measurement. Measure resin and hardener by weight or volume with precision. Refer to the instructions for your specific product—some, like Art Pro, require a 3:2 weight ratio, while others like Icrystal use a 2:1 mix.

Pour both parts into a clean mixing cup. Mix slowly and thoroughly to achieve a uniform blend. Scrape the sides and bottom of the cup repeatedly for at least 2–3 minutes. Mixing too quickly can introduce bubbles, which may become trapped in the cured layer.

Step 3: Apply the Resin Layer or Fill

Once fully mixed, begin pouring immediately. Pour in layers within recommended thickness guidelines. For example, Art Pro is best for coatings and shallow pours, while Trasparente is suitable for castings up to 2cm thick.

Spread the resin evenly with a stick or spatula for surface coats, or let it self-level inside a mould. Use a heat gun or torch carefully to remove surface bubbles. Avoid overworking the resin to prevent dust or debris settling in the finish.

Step 4: Curing and Aftercare

Leave your project untouched on a flat surface. Protect your curing resin from dust with a cover. Curing times may range from 12 to 24 hours for touch dry (depending on product and layer thickness) and up to 72 hours for full hardness.

Avoid moving or handling the object until fully cured to prevent marks or distortion. For maximum scratch resistance and gloss, allow full curing before heavy use. If working in cooler conditions, curing may take longer—patience ensures a perfect finish.

Tips and Common Mistakes to Avoid

• Mixing ratios must be followed strictly—guesswork leads to tacky or soft results.
• Pours thicker than product recommendations can cause overheating or cloudiness.
• Working in humid conditions may cause surface bloom—control room climate if possible.
• Do not add pigments or inserts until resin is fully blended and bubble-free.
• Always use clean containers to avoid contamination or unexpected reactions.
• If unsure about layer thickness, consult product information for best results.

Advanced Tips for Professional Results

Use a heat gun gently to remove bubbles, and wait for each layer to cure before re-coating. Experiment on a test area to check compatibility with inserts or surface materials, and always let your resin cure in a protected, stable environment.