Resin Shower Tray Project Inspiration

Explore stunning examples of custom-made resin shower trays in modern bathrooms. Notice the unique shapes, bespoke colours, and ultra-smooth finishes achievable using specialist epoxies. Resin trays can be moulded to any size and style, offering true flexibility in bathroom design.

Step 1: Prepare the Tray Mould and Workspace

Begin by thoroughly cleaning and assembling your mould to the required shower tray size and slope (for proper drainage). Ensure the surface is completely dry and free from dust or debris, as any imperfections will transfer into the finished tray. Apply an even coat of release agent to all internal surfaces of the mould to ensure easy removal once cured. Set up your workspace in a well-ventilated area, on a level surface, and lay down protective coverings to catch any resin drips or spills.

Always check the compatibility of your chosen resin with your mould and any reinforcement materials you plan to use, as improper pairing can lead to difficulties demoulding or surface defects.

Step 3: Pour and Level the Resin

Pour your resin slowly into the mould, starting from one end and working towards the other to avoid trapping air. Use a spreader or spatula to help guide the resin into corners and maintain a consistent layer throughout. For trays over 2cm thick, consider pouring in multiple layers, allowing each to partially cure before proceeding to avoid excessive heat build-up. Deep pour products such as Epoxytable 10-Ten are specially formulated to manage deeper castings and reduce the risk of yellowing or cracking.

Pour your resin slowly to avoid trapping air, and use a spirit level to check for evenness, especially around tray slopes.

Step 5: Surface Finishing and Installation Preparation

Inspect the demoulded tray and sand any sharp edges or minor imperfections using progressively finer sanding pads. For a brilliant, glass-like finish, apply a final thin coat of clear resin such as Trasparente and allow it to fully cure. Rinse and thoroughly clean the tray before dry-fitting into position in the bathroom. Check for surface flatness before installing to ensure watertightness and easy draining.

Expert Advice for DIY Resin Trays

Time, patience and planning are the keys to a flawless finish. Rushing the process—especially curing between layers—is the most common cause of flaws. For lasting durability, always opt for resins formulated for deep pouring and robust water resistance.