Polishing Systems for Resin Coatings

Choosing and Using a Polishing System

To enhance the shine of a resin coating, using a purpose-designed polishing system like the Epoxy Polish is recommended. While it may seem tempting to use only a clean cloth, this often fails to generate the necessary friction for a reflective finish. For best results, apply your chosen polish with a rotary polisher or a hand pad holder, which provides even pressure and increases efficiency.

• Start with a higher grit pad to remove surface imperfections.
• Progress to a finer pad or microfibre polishing sponge for a mirror-like gloss.
• Ensure each polishing stage is worked fully into the resin for optimal clarity and brilliance.

Troubleshooting Cloudiness and Streaks

If the polish appears cloudy after application, it’s often due to insufficient buffing or uneven distribution of the product. Repeat the polishing step using consistent, overlapping motions and check that the surface is completely clean. Investing in a hand pad holder or rotary polisher not only expedites the process but dramatically improves the finish, eliminating the risk of swirl marks and haziness.

When This Matters Most

Polishing systems are invaluable when you want your resin project to stand out with a high-gloss, professional finish. They’re especially important for items like coasters, table surfaces, or decorative panels, where clarity, reflectivity, and smoothness catch the eye.