Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How can I achieve a clear, smooth finish on my epoxy resin worktops?
Proper preparation and priming are the key foundations for a beautiful and resilient epoxy resin worktop. Taking the right steps before pouring ensures your resin bonds well and results in an ultra-smooth, clear finish.
Surface Cleaning and Sanding
Start with a thoroughly clean worktop. Remove any dust, grease, wax, or residues using a suitable cleaning agent. Once spotless, abrade the surface gently with fine grit sanding pads, such as Ebonite Abralon Sanding Pads, to create microscopic texture for optimal resin adhesion. Use grits between 360 and 800 for the initial sanding, working progressively if needed. After sanding, remove all debris for an even surface.
Priming for Optimal Adhesion
A quality primer layer is highly recommended, especially on porous or absorbent surfaces such as wood or bare MDF. This step prevents air bubbles, excessive absorption, and uneven curing. Some epoxy resins, like Art Pro, can be used as a thin seal coat. Apply a minimal layer, allow it to settle, and sand it lightly once cured for a perfect base.
Tips for Best Results
- Work in a dust-free, dry space to avoid imperfections.
- Mask edges with quality tape to avoid messy overpour.
- Allow primer or seal coats to cure fully and sand lightly for ideal grip.
Patience during preparation pays off with a finish that’s smooth, clear and durable.
When This Matters Most
Thorough preparation and priming are crucial when refinishing old worktops, working with absorbent substrates, or when aiming for a truly professional clear result on showpiece installations.
Related products
Related guides
By following careful preparation and priming steps, you set the stage for a truly flawless epoxy resin worktop. For more advanced guidance on achieving a glossy final surface, refer to our main guide on achieving a clear, smooth finish with resin.