How to Repair Resin Wardrobe Surface Damage

Preparing for the Repair

Begin by cleaning the cracked or damaged area thoroughly to remove dust, oils, or loose debris. Use a mild detergent and let the surface dry completely. For personal safety and to avoid skin contact with chemicals, it’s recommended to wear protective gear like nitrile gloves. Lightly sand the edges of the crack to achieve better adhesion.

Using a Resin Fibreglass Repair Kit

Select a polyester resin and fibreglass repair kit, such as the Resin Fibreglass Repair Kit – Complete Polyester Resin and Hardener Set. This set contains all you need: resin, hardener, fibreglass mat, gloves, brush, and a mixing container. Follow the instructions to mix the resin and hardener, then apply the mixture over and around the damaged area. For deeper or structural repairs, layer the fibreglass mat with the resin to reinforce the surface.

• Allow each layer to cure fully before sanding gently for a smooth finish.
• Repeat if necessary to build up strength.
• Mask off undamaged areas for a tidier repair.

Finishing Touches for a Seamless Result

Once the repaired area is fully cured and sanded, wipe it down to remove dust. If desired, you can paint over the repair to match the wardrobe’s original colour. Take care to use paint suitable for plastics to ensure good adhesion and a uniform look.