Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How to stretch resin to save money?
Choosing between pouring resin in one go or in smaller layers isn’t just about convenience – it can impact the final cost and success of your project. Here’s what resin users need to know when planning a budget-friendly pour.
Understanding When to Pour All at Once
If you’re working with an epoxy resin designed specifically for deep casting – such as Epoxytable 10-Ten – pouring the entire required depth at once can be both time-saving and cost-effective. These products allow single pours up to 10cm, minimising wastage as there’s less risk of layer lines, trapped bubbles, or unmixed edges that may require repair or extra material to fix. Reducing stages also cuts down on mixing errors or accidental overuse of resin.
Why Thinner Layers Are Sometimes Safer
For resins not intended for deep pours, layering in increments (typically 2–5cm per layer) is usually the safest approach. This avoids excessive heat build-up which can cause problems like cracking or incomplete curing. Wasted resin from overambitious deep pours can quickly increase your costs, especially if a failed cure means needing to remove and re-cast sections. Using the right layering technique helps ensure each batch is properly cured, preserving more of your material in the process.
When This Matters Most
- Large, deep projects: Deep-pour resins are more efficient for single-stage work.
- Standard coating or small items: Multiple thin layers are safer and help stretch your resin budget by avoiding mishaps.
Related products
Related guides
Whether you choose single or layered pours, matching your method to the type of resin and project thickness is key to saving on materials and costs. Explore more practical tips for resin efficiency on our main guide to stretching resin.