Super Low-Viscosity, Deep Pour Resins: A Guide for Artists and Makers

What Makes a Deep Pour Resin Different?

Unlike standard epoxy resins, deep pour formulas are engineered with much lower viscosity. This allows the resin to flow smoothly around embedded items, minimising air bubbles and ensuring a level finish. They are specifically designed to cure slowly and evenly without excess heat, making it possible to pour layers far thicker than what standard resins allow—often up to 10cm in a single pour when using products like Epoxytable 10-Ten.

Choosing the Right Resin for Your Project Depth

• For castings up to 2cm thick, a clear casting resin such as “Trasparente” offers excellent clarity and bubble release.
• Projects between 2–5cm benefit from trusted deep pour options like “EpoxyTable 5-Five” for clarity and mechanical resistance.
• Very deep pours, up to 10cm in one go, require specialised products such as “Epoxytable 10-Ten”, which are formulated for slow and safe curing at larger volumes.

Always select your resin based on the maximum thickness of your intended pour, as using the wrong type may cause overheating or compromised clarity.

Practical Tips for a Clear, Professional Result

• Allow your resin and work environment to remain at stable room temperature for best results.
• Pour in a single deep layer only if your resin is rated for the planned thickness – otherwise, work in stages.
• Prepare embedded items by sealing them if needed, as porous objects can introduce trapped air or cause cloudiness.
• Take your time; deep pour resins offer extended working time so you can arrange and remove any bubbles that rise during the process.