Why are bubbles appearing in my epoxy paint?

← Back to How do you spread epoxy paint?

Bubbles in epoxy paint can be frustrating, but understanding their causes can help you achieve a smooth, professional-looking surface. Here’s how to tackle and prevent unwanted bubbles.

Common Causes of Bubbles in Epoxy Paint

Bubbles most frequently form due to air trapped during the mixing or application process. Vigorous or incomplete mixing, pouring the paint from a height, or failing to release air before the resin begins to cure are the main culprits. Environmental conditions like applying epoxy in humid or cold environments can make the problem worse.

• Over-mixing: Excessive whisking incorporates air.
• Rapid pouring: Pouring from too high traps more air.
• Tool choice: The wrong tool can disturb the surface and introduce bubbles.

Practical Steps to Prevent and Remove Bubbles

For best results, stir your epoxy with gentle, steady motions using a suitable utensil—like a wooden spatula—to minimise air incorporation. After pouring, use a heat gun or hairdryer on a low setting, held just above the surface, to encourage bubbles to rise and pop before the paint sets. Working in a clean, dust-free area with stable temperatures is also beneficial.

When Bubble Prevention Is Especially Important

Pay special attention to bubble prevention when finishing high-gloss surfaces, tabletops, or artwork where clarity matters. Imperfections are far more visible on smooth or transparent finishes, so take extra care with preparation and tools.

Related products

• Resin & Paint Application Rollers – Short-Pile, Large, and Sponge Types
• Tooth Shaped Spatula for Epoxy Resin Application
• Wooden Spatula for Epoxy Resin Mixing – 90x10mm & 114x15mm, Pack of 50

Related guides

• How Do You Spread Epoxy Paint

Mastering these techniques helps you achieve smooth, beautiful epoxy finishes. For more tips and guidance on the complete epoxy painting process, visit our main guide to spreading epoxy paint.