Epoxy enamel fillers

💥 About EPOXYWOOD wood restoration epoxy resin is a versatile, solvent-free formula designed for reliable repair and weatherproofing of wooden surfaces. Thanks to its ultra-low viscosity, EPOXYWOOD penetrates deeply into the wood, strengthening fibres from within. Perfectly suited for marine applications, it provides essential protection and sealing for boat hulls. Compatible with wood, fibreglass, and metal, EPOXYWOOD enhances both structure and appearance while maintaining the natural flexibility of wood, giving it a warm, deep look with its noble straw-yellow tint that highlights the natural beauty of the fibres. 💡 Key Benefits Deep Penetration for structural reinforcement and long-lasting protection. 💧 Complete Waterproofing ensures treated wood is moisture-resistant—ideal for marine use including boat hulls. 🌊 Natural Finish with a warm, deep straw-yellow tone that enhances wood grain beautifully. 🎨 Eco-Friendly Formula is solvent-free, cruelty-free, and vegan. 🌿 ☝🏽 Useful Information Surface Preparation: Ensure surfaces are clean, dry, and sanded for best adhesion. Application: Not suitable for thick castings; perfect for wood, fibreglass, and metal coatings. Finish Colour: Achieves a warm, straw-yellow finish that highlights natural wood fibres. Mixing Tip: For filler applications, mix with glass beads in a 2/3 ratio to create an effective wood putty. 🎯 Who It’s For – Resin artists and crafters – DIY enthusiasts working on wood restoration – Professionals in woodworking, construction, surface repair, and marine maintenance Restore and protect your wooden treasures for years to come—buy EPOXYWOOD now for a professional, waterproof finish!

Kit 1.25kg [44oz]:Epoxy Resin (A): 1kg;Hardener (B): 0.25kg. 🎁Free gloves + mixing sticks + Instruction

This MAESTRO kit includes: -30 kg deep pour epoxy resin for castings up to 5 cm -Glossy “Shiny Shield” release film (32cm*4m) -500gr Non-toxic silicone paste to seal your frame -Polishing KIT (polishing pads 6pcs + professional polishing paste 250ml) -6 True Green pigment pastas -Detailed instructions on how to create the formwork step by step and pour the resin. 🎁Free gloves + mixing sticks + Instruction The kit is sufficient to create a table with an area of 2 m2 (e.g. 90 cm x 150 cm, thickness 2 cm) – These quantities are calculated on a “classic” 2/3 wood and 1/3 resin table. For any queries or if you may need some advice, please contact the ResinPro technical team.

"EVERSHINE COLLECTION"– The Artisan Jewelry Resin Kit - Epoxy Resin + 100 Accessories: Unleash your creativity with the Epoxy Resin Starter Kit + 100 Accessories – the ultimate all-in-one set for jewelry making, personalized gifts, and DIY resin crafts. Featuring the user-friendly “One-to-One” epoxy resin with a simple 1:1 mixing ratio, this kit ensures crystal-clear, bubble-free results every time. Packed with over 100 accessories, the kit includes silicone letter molds, dried flowers, colorful decorative pigments, and keychain findings to bring your designs to life. For precision and detail, a mini drill with attachments is also included, along with mixing tools, gloves, and step-by-step instructions. Perfect for beginners and hobbyists, this starter kit is easy, safe, and fun to use – making it a fantastic way to craft one-of-a-kind jewelry, charms, and keepsakes. Beautifully packaged, it also makes an inspiring and thoughtful gift for creative friends and family. What’s inside: ✨ 500 g “One-to-One” Epoxy Resin – crystal-clear, medium-viscosity resin (1:1 ratio) 🌸 12 decorative pigments + dried flowers – endless creative combinations 🔤 Silicone mold with letters – ideal for personalized charms & keychains 🔑 Keychain bases, clasps, rings & accessories (100+ pcs) – everything ready to assemble 🔧 Mini drill with attachments – precision work for jewelry and details 🧤 Gloves + mixing tools + instructions – easy, safe, beginner-friendly 1.Prepare your workspaceWork on a flat, protected surface (cover it with baking paper).Make sure the room is well ventilated.Put on latex finger cots (or gloves) to keep your hands clean and avoid fingerprints on the resin. 2.Choose your designSelect your decorations: Pressed dried flowers for a botanical look. Mini decorative glitters, sequins or beads for sparkle.You can combine them if you like. 3.Place the decorations in the mouldIf using flowers, lay them gently into the mould cavity facing down (this will be the “front” of your keychain).Sprinkle in a small amount of glitter or decorative pieces.Don’t overfill – you still need space for the resin. 4.Mix the epoxy resin (1:1 ratio)Take equal parts of “One-to-One” epoxy resin and hardener (1:1 ratio – follow the amount suggested on the bottle).Pour both parts into a clean mixing cup.Stir slowly for 2–3 minutes, scraping the sides and bottom, until the mixture looks uniform and clear.For best results, pour the entire mixture into a new cup and stir for another 2 minutes.Keep an eye on the temperature so the resin does not heat up too much.Stir gently to avoid adding too many bubbles. 5.Add colour (optional)If you want a tinted piece, add a small amount of pigment or glitter into the mixed resin.Stir until the colour is even.Keep the mix fairly transparent so your flowers or decorations can still be seen. 6.Pour the resin into the mouldSlowly pour the resin into the chosen mould cavity.Fill it almost to the top, but don’t overflow.If bubbles appear on the surface, gently pop them with a toothpick or use a heat gun. 7.Let the resin cureLeave the filled mould on a flat surface, away from dust and direct sunlight.We recommend removing the piece from the mould after around 12 hours to prevent damage to the mould.After that, leave the piece to dry completely. This type of resin fully hardens in about 24 hours. 8.Demould your charmGently remove your charm from the mould.If there are any sharp edges, you can carefully sand them down (optional). 9.Drill a hole and add the eye screwDecide where you want to attach the keychain (usually at the top of the charm).Use the mini precision screwdriver/drill to make a small pilot hole.Take one of the eye screws (small metal screw pins) and twist it into the hole until it feels secure. 10.Assemble the keychainUse a jump ring to connect the eye screw to the connecting fastener for keychains.Gently open the jump ring, hook it through the eye screw and the fastener, then close it again.If you like, add a decorative tassel to the same jump ring or fastener for an extra touch of colour.Finally, attach the fastener to a keyring (included in the kit). Your personalised resin keychain is now ready to use or gift 🎁Repeat the steps with different letters, colours, flowers and glitters to create a whole collection.

💥 About Unleash your creativity with our Mastering Epoxy Resin e-book, designed for both aspiring artists and seasoned DIYers. This ultimate resource provides expert insights and comprehensive techniques to help you bring your imaginative projects to life. 💡 Key Benefits Clear Instructions make complex techniques manageable! 🎨 Expert Tips to help you avoid common mistakes and enhance your creations. ✨ Diverse Projects to inspire stunning resin jewellery, captivating art, and unique home decor. 🧰 🎯 Who It’s For – Hobbyists and DIYers – Professional artists or makers + Digital product includes comprehensive step-by-step guides + Enjoy lifetime access to your creative learning resource Start your journey to becoming an epoxy resin expert today!

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.