Granulars Archive - Page 224 of 1000 - ResinPro

Cleaning fresh epoxy resin residues

To clean fresh epoxy resin residues, it is essential to act promptly. Here are some steps to follow:

Use acetone or isopropyl alcohol to remove the uncured resin from the surface.
If the resin has partially cured, gently scrape off the residues with a scraper or spatula.
Dip a cloth in acetone and gently dab the affected area to dissolve any remaining residues.
If necessary, repeat the process until the surface is completely clean.
Finally, thoroughly wash the area with water and soap to remove any residual traces of epoxy resin.
By carefully following these steps, you can effectively clean fresh epoxy resin residues.

Epoxy resin

Epoxy resin is a thermosetting material widely used for the creation of protective coatings and glossy surfaces. Composed of two main components, epoxy resin and hardener, this mixture catalyzes a chemical reaction that leads to the formation of a resistant and durable surface. Epoxy resins are appreciated for their high adhesion, chemical resistance, and insulating properties. Widely used in the DIY and construction sectors, epoxy resins allow the creation of smooth and shiny surfaces on various materials such as wood, metal, and plastic. They are also ideal for making artisanal jewelry and artistic coatings.

How to Remove Epoxy Resin from Hands

To remove epoxy resin from your hands, you can follow these simple steps:

Wash hands with water and soap: use warm water and antibacterial soap to remove most of the fresh resin.
Use acetone: soak a cotton ball with acetone and gently rub on the affected areas. Acetone helps dissolve hardened resin.
Exfoliate the skin: if any residue remains, you can gently exfoliate the skin with a homemade scrub or a gentle exfoliating product.
Apply moisturizer: after completely removing the resin, moisturize your hands with a cream to restore the skin’s moisture.
Avoid scratching or rubbing too vigorously to prevent skin irritation.

Epoxy resin solvent

An epoxy resin solvent is a chemical compound used to thin and clean epoxy resins. This type of solvent is essential for adjusting the viscosity of the resin and for cleaning the tools used during the processing. It is important to choose a solvent that is compatible with the epoxy resin in use to ensure the best material performance. Before using any solvent, it is advisable to carefully read the manufacturer’s instructions and follow safety precautions, as some solvents can be toxic and flammable.

Cleaning epoxy resin pins

Cleaning epoxy resin pins is essential to ensure precise and uniform application of the material. Here’s how to clean them properly:

Use isopropyl alcohol to remove any residues of hardened resin.
Make sure to use clean tools free from impurities.
If residues are stubborn, you can resort to specific solvents for epoxy resin.
Avoid using sharp objects that could damage the pins.
After cleaning, make sure to thoroughly dry the pins before reusing them to prevent contamination.

Cleaning tape residue

To clean tape residue, you can follow some simple steps:

Dampen a soft cloth with warm water and mild soap.
Apply the cloth to the surface with tape residue and let it sit for a few minutes.
After softening the residue, gently rub to remove it.
If the residue is stubborn, you can use a specific adhesive residue cleaner.
Finally, thoroughly dry the surface with another clean, dry cloth.
By following these steps, you can effectively clean tape residue without damaging the underlying surface.

Transparent Epoxy Resin

Transparent epoxy resin is a versatile and durable material, widely used in various industries. This resin, composed of two components, is mixed to create a homogeneous blend that quickly hardens, forming a transparent and glossy surface. Thanks to its adhesive and resistant properties, transparent epoxy resin is ideal for coating surfaces such as wood, metal, fabric, and more. It is often employed in the DIY sector to create jewelry, table coatings, bathroom countertops, and much more. Its transparency allows for preserving the natural look of the underlying materials, giving them a touch of elegance and protection.

Epoxy resin for artistic creations

Epoxy resin for artistic creations is a versatile and durable material, ideal for making jewelry, decorations, and artworks. This transparent resin, once cured, creates a glossy and durable surface that enhances the details and colors of your creations. It can be used on various substrates such as wood, glass, metal, and fabric, ensuring a professional and high-quality result. Thanks to its easy mixing and application, epoxy resin is widely appreciated by creatives and DIY enthusiasts for creating unique and personalized pieces.

Epoxy resin for DIY jewelry

Epoxy resin is a versatile and durable material, perfect for creating unique and personalized DIY jewelry. This transparent resin, once cured, creates a glossy glass effect that enhances stones, dried flowers, glitter, and other elements included in the jewelry. To make jewelry with epoxy resin, it is important to carefully follow the mixing and curing instructions to achieve optimal results. Additionally, you can color the resin with specific pigments to further customize your jewelry. With a bit of creativity and attention to detail, you can create beautiful DIY jewelry with epoxy resin.

Colored Epoxy Resin

Colored epoxy resins are versatile and popular products in the coatings industry. These resins, composed of epoxy resins and colored pigments, offer a wide range of creative possibilities in the DIY sector and artistic applications. Colored epoxy resins are used to create smooth, glossy, and colored surfaces on various materials such as wood, metal, and plastic. Thanks to their resistance and durability, they are ideal for protective and decorative coatings. Moreover, the ability to mix different shades allows for customized and unique results for each project.

Cleaning sticky residues from liquid resin

To clean sticky residues from liquid resin, you can follow these steps:

Use a specific solvent for resins, such as isopropyl alcohol or acetone.
Dip a clean cloth into the solvent and gently dab the affected area to soften the resin.
Gently scrape with a plastic spatula to remove the softened residues.
Repeat the process until the residues are completely removed.
Finally, clean the area with water and soap to eliminate any traces of solvent.
It is important to be careful not to damage the surfaces during cleaning.

Epoxy Resin

Epoxy resins are chemical compounds mainly used as protective coatings and adhesives. These resins are widely employed in the DIY sector to create smooth and durable surfaces. Epoxy resin, once cured, forms a hard coating that is resistant to wear, solvents, and weathering. Due to their versatility, epoxy resins are also used to craft handmade jewelry, decorations, and repair damaged surfaces. Epoxy resin is composed of two components that, when mixed together, chemically react to form a strong and durable solid.

How to Remove Epoxy Resin Residues

To remove epoxy resin residues, you can follow these steps:

Use a scraper or a spatula to gently remove the top layer of the hardened resin.
Apply acetone on a clean cloth and rub the affected area gently to soften the resin.
If the residues are stubborn, you can use fine-grit sandpaper to sand the surface without causing damage.
Finally, clean the area with water and soap to remove any traces of acetone.
Remember to always wear protective gloves and work in a well-ventilated area when handling chemicals like acetone.

Cleaning hardened resin surfaces

To clean hardened resin surfaces, it is advisable to follow these steps:

Dampen a cloth with warm water and mild detergent.
Gently dab the surface to soften the resin.
Use a plastic scraper to gently remove the hardened resin.
Repeat the process until the resin is completely removed.
If necessary, use isopropyl alcohol to eliminate any residues.
Finally, thoroughly dry the surface with a clean cloth.
Always remember to test the detergent on a small hidden area to check compatibility with the surface to be cleaned.

Removing epoxy resin stains on objects

To remove epoxy resin stains on objects, you can follow some simple steps:

Start by gently scraping off the hardened resin with a spatula or a sharp object.
Next, apply denatured alcohol or acetone on the stain and let it sit for a few minutes.
After allowing the solvent to work, clean the area with a clean, dry cloth.
If the stain persists, you can try using a degreasing detergent or a specific product for cleaning resins.
Finally, make sure to thoroughly wash the object with water and soap to remove any solvent residues.
By carefully following these steps, you should be able to effectively remove epoxy resin stains from objects.

Cleaning epoxy residues in the laboratory

To clean epoxy residues in the laboratory, it is advisable to use specific solvents such as acetone or isopropyl alcohol. It is important to wear appropriate personal protective equipment, such as gloves and protective goggles, to avoid skin irritations or eye damage. It is recommended to apply the solvent on the affected surface and use a clean cloth to gently remove the residues. In case of more stubborn residues, plastic spatulas or scrapers can be used to assist in the removal. It is essential to follow the epoxy manufacturer’s instructions and take care not to damage the surrounding surfaces during cleaning.

Epoxy resin residues in the laboratory

Epoxy resin residues in the laboratory can be effectively removed by following some steps. First of all, it is advisable to use specific solvents for epoxies, such as acetone or isopropyl alcohol. Subsequently, the residue can be gently scraped off with a non-abrasive plastic or metal scraper. If the residue is particularly stubborn, heat can be applied using a hairdryer to soften it and facilitate its removal. It is important to work in a well-ventilated area and use personal protective equipment, such as gloves and a mask, during this operation.

How to Remove Epoxy Resin from Surfaces

To remove epoxy resin from surfaces, you can follow these steps:

Use a hairdryer or a heat gun to warm up the resin and make it easier to remove.
Gently scrape the resin with a spatula or a plastic scraper to avoid damaging the underlying surface.
Apply acetone or isopropyl alcohol on the remaining resin with a clean cloth to dissolve it.
Gently dab the dissolved resin with a clean cloth until completely removed.
Finally, wash the surface with water and soap to eliminate any residue.
By following these steps, it will be possible to effectively remove epoxy resin from surfaces.

Epoxy resin cleaning solvents

Cleaning solvents for epoxy resin are useful for removing any residues or stains. Solvents such as acetone or isopropyl alcohol can be used to clean hardened epoxy resin. However, it is crucial to test the solvent on a small hidden area to check compatibility and avoid damage to the surface. It is recommended to use protective gloves and work in a well-ventilated area when handling solvents. Additionally, it is important to follow the instructions provided by the epoxy resin manufacturer to ensure effective cleaning without damaging the material.

Epoxy resin residue cleaner

An epoxy resin residue cleaner is a specific product designed to effectively remove epoxy resin buildup from surfaces, tools, or equipment. These cleaners are formulated with chemical agents capable of dissolving and removing hardened resin without damaging the underlying support. Before use, it is advisable to check the compatibility of the cleaner with the material to be cleaned. Furthermore, it is important to carefully follow the manufacturer’s instructions to ensure safe and effective cleaning. Epoxy resin residue cleaners are useful in industrial, artisanal, and DIY environments where resin is commonly used.

Cleaning residues from thick adhesive tapes

To clean residues from thick adhesive tapes, it is advisable to follow these steps:

Dampen the residue with hot water to soften it.
Apply a degreasing detergent on the affected area.
Use a spatula or a scraper to gently remove the residue.
If necessary, repeat the process until the residue is completely removed.
Finally, dry the treated area thoroughly.
This method is effective for cleaning residues from thick adhesive tapes on various surfaces, ensuring a thorough cleaning without damaging the underlying support.

EPOXY RESIN

Epoxy resin is a thermosetting material, composed of epoxy resin and hardener, used to create protective coatings on various surfaces. This type of resin is valued for its mechanical, chemical, and heat resistance, as well as its ability to adhere to a wide range of materials. Common applications include industrial flooring, wall and furniture coatings, as well as creative DIY projects. Prior to application, it is crucial to thoroughly prepare the surface and carefully follow the instructions to achieve optimal results. Epoxy resin is an excellent choice for creating durable and high-quality surfaces.

Creating jewelry with epoxy resin

Creating jewelry with epoxy resin is an increasingly popular creative activity. Epoxy resin is a versatile and durable material that allows for the creation of beautiful custom jewelry. To create jewelry with epoxy resin, it is necessary to follow some fundamental steps:

Prepare the materials: purchase transparent epoxy resin, colors, pigments, molds, and accessories.
Mix the epoxy resin carefully following the manufacturer’s instructions.
Add colors and pigments to customize the jewelry.
Pour the resin into the molds and let it dry.
Once hardened, remove the jewelry from the molds and refine the details.
With a bit of creativity, it is possible to create unique and original jewelry with epoxy resin.

Coloring techniques with pigments for epoxy resin

Coloring techniques with pigments for epoxy resin are essential to achieve high-quality results in resin products. Epoxy resin pigments are concentrated colorants used to dye resins and obtain custom shades. Here are some common techniques:

Mixing: the pigment is added directly to the resin and carefully mixed until the desired color is achieved.
Color gradient: shades can be created by mixing different amounts of pigment to achieve a gradient effect.
Special effects: metallic, pearlescent, or fluorescent pigments can be added to create unique finishes.
Layering: three-dimensional effects can be created by alternating layers of colored resin with pigment.
These techniques offer endless creative possibilities in the epoxy resin and DIY coatings sector.

Making silicone molds for epoxy resin

To make silicone molds for epoxy resin, it is essential to follow some precise steps. First, prepare the model from which you want to create the mold. Then, pour the liquid silicone onto it, making sure to eliminate any air bubbles. After the necessary curing time, the model can be removed, and the silicone mold will be ready for use. These types of molds are ideal for producing resin objects with precise details and quality finishes. Remember to always use high-quality materials and carefully follow the instructions to achieve optimal results.

Cleaning glue residues with a safe formula

To safely clean glue residues, it is advisable to use a gentle solvent such as isopropyl alcohol or acetone. These substances are effective in removing glue residues from various surfaces without damaging them. Before proceeding with the cleaning, make sure to test the solvent on a small hidden area to check compatibility with the material. Apply the solvent on a soft cloth and gently dab the area affected by the glue residues. Avoid scraping or rubbing too vigorously to prevent surface damage. Once the glue residue is removed, clean with water and soap to eliminate any traces of the solvent used.

Epoxy Resin

Epoxy resin is a thermosetting material widely used for the creation of coatings and protective surfaces. Thanks to its high chemical and mechanical resistance, epoxy resin is ideal for creating durable and waterproof finishes. This type of resin is often employed in the DIY sector for making jewelry, artistic artifacts, and floor coatings. Epoxy resin is composed of two main components, the resin and the hardener, which need to be mixed together to activate the hardening process. Once hardened, epoxy resin forms a smooth and resistant surface, suitable for multiple applications.

How to Remove Epoxy Resin

To effectively remove epoxy resin, you can follow these steps:

Start by gently scraping the surface with a spatula or scraper to remove the outer layer of the resin.
Apply a specific solvent for epoxy resins to the affected area and let it act for the recommended time.
After softening the resin, use a microfiber cloth to wipe off the residue.
Repeat the process if necessary until the resin is completely removed.
Finally, wash the surface thoroughly with water and soap to eliminate any solvent residues.
Always remember to follow the manufacturer’s instructions and work in a well-ventilated area.

Epoxy resin solvent

An epoxy resin solvent is a chemical compound used to dissolve and remove cured epoxy resin. These solvents are designed to soften the resin, making it easier to remove from surfaces, tools, or equipment. It is important to choose the correct solvent based on the type of epoxy resin being treated, as some solvents can damage certain types of resin. It is advisable to use specific epoxy resin solvents available on the market, carefully following the manufacturer’s instructions for safe and effective use. The use of personal protective equipment, such as gloves and a mask, is recommended when handling epoxy resin solvents.

Epoxy resin cleaner

An epoxy resin cleaner is a specific product designed to remove epoxy resin residues from surfaces. These cleaners are formulated to effectively dissolve and remove traces of cured resin, ensuring thorough cleaning without damaging the underlying surfaces. Typically, epoxy resin cleaners are available in various forms such as spray, gel, or concentrated liquids, and are applied following the manufacturer’s instructions. It is important to use such products in well-ventilated environments and adhere to safety guidelines, such as wearing protective gloves and goggles.

Cleaning residues from glazed ceramic

To clean residues from glazed ceramic, it is advisable to follow some effective steps:

Mix hot water with a mild detergent.
Apply the solution to the glazed surfaces and let it sit for a few minutes.
Use a soft sponge or non-abrasive cloth to remove the residues.
If residues persist, try gently scrubbing with baking soda and water.
Finally, rinse thoroughly with clean water and dry with a soft cloth.
Avoid using overly aggressive products that could damage the glaze. This method is effective for keeping glazed ceramic clean and shiny.

Epoxy Resin

Epoxy resin is a thermosetting material widely used in the coatings and finishes sector. Composed of two components, epoxy resin and hardener, this resin offers a resistant and durable surface once cured. Its characteristics of adhesion, chemical resistance, and mechanical strength make it ideal for protective coatings on surfaces in various areas, such as floors, countertops, and decorative surfaces. Thanks to its versatility, epoxy resin is also appreciated in the DIY sector for artistic and craft projects. It is important to carefully follow the instructions for correct mixing and application in order to achieve optimal results.

Resin Creations Tutorial

Resin creations are becoming increasingly popular as a creative activity. To make unique objects with resin, follow these steps:

Prepare the work area: make sure you have a well-ventilated space protected from sunlight.
Measure the resin and hardener: carefully follow the recommended proportions to avoid errors in the catalyzation process.
Mix gently: combine resin and hardener by stirring slowly to prevent the formation of air bubbles.
Add colors and decorations: customize the resin with pigments or glitter to create special effects.
Pour and wait: pour the resin into molds and let it dry following the recommended curing times.
Remove carefully: once hardened, carefully remove the object from the mold.
By following these steps, you can create beautiful DIY resin creations.

DIY silicone molds

DIY silicone molds are useful for creating customized objects in a simple and precise way. To make them, all you need is some liquid silicone suitable for food contact and a model to replicate. After preparing the silicone following the manufacturer’s instructions, pour it onto the model and let it dry completely. Once hardened, it is possible to extract the object from inside the silicone mold and reuse it. This technique is ideal for creating detailed reproductions of objects or artistic creations at home, without the need for professional tools.

Colored Resin Pigments

Colored pigments for resin are substances used to dye and customize epoxy and polyurethane resins. These pigments are available in a wide range of colors and are usually in liquid or powder form. By adding pigments to the resin, it is possible to create unique and personalized chromatic effects for artistic projects, DIY jewelry, coatings, and more. It is important to carefully follow the dosage instructions to achieve the desired color without compromising the properties of the resin. Colored resin pigments are widely used by hobbyists, artists, and professionals to add vibrancy and creativity to their work.

Cleaning adhesive residues from painted surfaces

To clean adhesive residues from painted surfaces, it is advisable to follow these steps:

Dampen a soft cloth with warm water and mild detergent.
Gently dab the affected area to soften the adhesive residues.
Use a plastic scraper to gently remove the residues without damaging the paint.
Repeat the process until the residues are completely removed.
Thoroughly dry the surface with a clean, dry cloth.
Avoid using aggressive solvents that could damage the paint. If in doubt, it is advisable to consult a professional in the field.

EPOXY RESIN

Epoxy resin is a thermosetting material, composed of two components: resin and hardener. When mixed together, they undergo a chemical reaction that leads to polymerization. This process creates a hard, durable, and versatile material, widely used in the coatings, construction, and DIY sectors. Epoxy resins offer a smooth and waterproof surface, ideal for coating floors, furniture, artistic surfaces, and much more. Thanks to their excellent adhesive properties and strength, epoxy resins are a popular choice for projects that require durability and high-quality finishes.

Epoxy resin cleaning tutorial

Cleaning epoxy resin is a fundamental step to maintain the quality and appearance of resin artifacts. Here are some simple steps to follow to clean epoxy resin properly:

Use warm water and mild soap to remove surface dirt.
Avoid aggressive solvents that could damage the resin.
For stubborn stains, use a gentle and non-abrasive detergent.
Dry thoroughly with a soft cloth to avoid streaks.
To maintain shine, you can use a specific polish for epoxy resin.
By following these tips, you can keep your epoxy resin clean and in perfect condition over time.

Removing epoxy resin residues from delicate surfaces

To remove epoxy resin residues from delicate surfaces, it is advisable to use a gentle approach to avoid damage. Here are some effective methods to follow:

Dampen a soft cloth with olive oil and gently rub it on the surface to dissolve the resin.
Apply warm white vinegar to the affected area and let it sit for a few minutes before cleaning with a soft cloth.
Use a mixture of baking soda and water to create a paste to apply to the resin and gently remove it.
By following these guidelines, you will be able to remove resin residues without damaging delicate surfaces.

Tips for cleaning epoxy resin

Cleaning epoxy resin can be done by following some simple tips:

Use warm water and mild soap to remove light dirt.
For more stubborn stains, it is recommended to use isopropyl alcohol.
Avoid using aggressive solvents that could damage the coating.
Use sponges or soft cloths to avoid scratching the surface.
Thoroughly dry with a dry cloth to prevent streaks.
For daily maintenance, avoid the accumulation of dust and dirt on the resin.
By following these tips, it will be possible to keep the epoxy resin clean and in excellent condition over time.

Cleaning vinyl adhesives quickly

To clean vinyl adhesives quickly, it is advisable to follow these steps:

Dampen a cloth with warm water and mild detergent.
Apply the cloth to the surface with the vinyl adhesive and let it sit for a few minutes.
Gently rub to remove the softened adhesive.
If necessary, repeat the process until the adhesive is completely removed.
Finally, thoroughly dry the treated area.
Avoid using aggressive solvents that could damage the surface. This method ensures an effective and quick cleaning of vinyl adhesives without compromising the integrity of the underlying material.

Epoxy Resin

Epoxy resin is a thermosetting material widely used for its strength and versatility. Composed of epoxy resin and hardener, this mixture creates a robust and durable coating once cured. Epoxy resin applications range from the construction industry to crafts, with common uses in flooring, surface coatings, and artistic creations. Thanks to its ability to adhere to a wide range of materials, epoxy resin is a popular choice in the DIY sector for creative and restoration projects. Its resistance to wear and weathering makes it ideal for multiple purposes.

Epoxy Resin Tutorial

Epoxy resin is a versatile and durable material used to create transparent and decorative coatings on various surfaces. To carry out a project with epoxy resin, follow these steps:

Prepare the work area: make sure it is well-ventilated and protected from dust and dirt.
Measure the resin and hardener accurately following the recommended proportions.
Gently mix the two components for at least 2-3 minutes.
Add any colors or pigments to customize your project.
Pour the resin onto the object to be coated and level it with a spatula.
Let it dry for the indicated time and protect it from moisture during the curing process.
By carefully following these instructions, you can create fantastic DIY projects with epoxy resin.

Guide to Silicone Molds

Silicone molds are versatile and durable tools used to create repeated shapes of epoxy resins and other materials. To make a DIY silicone mold, follow these steps:

Prepare the model: clean it and apply a release agent.
Mix the silicone: use silicone mold rubber and catalyst in correct proportions.
Pour the silicone onto the model: make sure to eliminate air bubbles.
Wait for the curing time: respect the drying times.
Remove the mold: carefully extract the model.
By carefully following these instructions, you can create high-quality silicone molds for your DIY projects.

Resin Pigment Tips

Pigments for resin are essential to customize and color your creations. Here are some useful tips to achieve optimal results:

Choose specific pigments for resin and avoid oil or acrylic colors, which could compromise the resin curing process.
Mix the pigments thoroughly to avoid lumps or streaks in the final color.
Gradually add the pigments to the resin until the desired intensity is reached.
Experiment with different quantities and combinations of pigments to create new shades and special effects.
Remember to follow the manufacturer’s instructions to ensure proper mixing and polymerization of the resin.

Cleaning thick adhesives effectively

To clean thick adhesives effectively, it is advisable to follow these steps:

Use a specific solvent for epoxy resins, such as acetone or isopropyl alcohol, to dissolve the excess adhesive.
Gently scrape with a spatula or scraper to remove the softened adhesive.
Apply heat with a hairdryer to facilitate the adhesive removal.
If necessary, use a stiff brush to eliminate stubborn residues.
Finally, clean the area with water and soap to completely remove adhesive and solvent residues.
By following these steps, it will be possible to clean thick adhesives effectively without damaging the underlying surfaces.

Transparent Epoxy Resin

Transparent epoxy resin is a versatile material widely used in the coatings and DIY sector. This resin, composed of two main components (resin and hardener), provides a hard, resistant, and glossy surface once cured. Thanks to its transparency, it is ideal for creating protective coatings on surfaces such as wood, metals, plastic, and more. Transparent epoxy resin is also used for making handmade jewelry, resin tables, artistic decorations, and much more. It is important to carefully follow the mixing and application instructions to achieve optimal results.

How to Clean Epoxy Resin

To effectively and safely clean epoxy resin, follow these simple steps:

Use warm water and mild soap to remove surface dirt.
For more stubborn stains, use isopropyl alcohol or acetone with a soft cloth.
Avoid using aggressive solvents that could damage the resin.
To eliminate light scratches, polish the surface with a specific abrasive paste.
Make sure to thoroughly dry the resin after cleaning to prevent streaks.
By following these instructions, you can keep your epoxy resin clean and in excellent condition over time.

Silicone mold cleaning

Cleaning silicone molds is essential to ensure quality and longevity over time. Here are some useful tips:

Use hot water and mild soap to remove dust or dirt residues.
Avoid using hard brushes or aggressive detergents that could damage the silicone.
If necessary, gentle solvents such as isopropyl alcohol can be used to remove persistent stains.
Dry the molds thoroughly after cleaning to prevent mold formation.
Store the molds in a cool, dry place to preserve their characteristics.
By following these guidelines, proper maintenance of silicone molds is ensured.

Removing resin pigments

To remove pigments from resin, you can follow these steps:

Prepare a solution of warm water and mild soap.
Gently apply the solution to the resin surface.
Use a sponge or soft cloth to gently rub the pigments.
If the pigments persist, you can try using isopropyl alcohol.
Gently dab the alcohol on the affected area and rub with a clean cloth.
Repeat the process until the pigments are completely removed.
Finally, rinse the surface thoroughly with clean water and dry it carefully.
These methods can help effectively and safely remove pigments from resin.