“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

“PURE MOLD”: PLATINUM BASED TRANSLUCENT AND FAST LIQUID SILICONE RUBBER FOR THE CREATION OF MOULDS COMPATIBLE WITH RESIN.

Excellent for hot waxes used in candle making.

Very easy to use silicone for creating detailed moulds of any size!

Description. Liquid medium-hard condensation pourable silicone rubber . PURE MOLD is a two-component addition silicone rubber that vulcanizes at room temperature.
Due to its remarkable fluidity, it is ideal even for the duplication of models with undercut areas.

The main qualities of the product make it particularly suitable for the use of:

• epoxy resins,
• polyester,
• polyurethanes and acrylics,
• cements and plasters.

• + Liquid
• + Fast (3-8H)
• + Translucent
• + Resistant.

It possesses high mechanical characteristics, and it is suited for the preparation of casts with considerable undercuts: reproduction of bronze statues (artistic foundries), serial reproduction of complex objects in resin (polyester, polyurethane and epoxy), in plaster, natural and synthetic wax, concrete (e.g. statues, decorative garden items, decorative candles, prototypes, decorative ceramics, rosettes, frames, faux wood decorations, etc.). Casts for technical products.

AREAS OF APPLICATION
Thanks to its considerable accuracy in reproduction, its high dimensional stability and its mechanical resistance, PURE MOLD silicone rubber is especially good for model and mould making. Its great fluidity and its high dimensional stability make it ideal for decorative pottery, ceramic and jewellery serigraphy and concrete moulding. Silicone rubber is compatible with the majority of Epoxy, Polyurethane and Acrylic resins, and with plaster and cement.

WARNINGS:
During processing, use protective masks, gloves, and other protective clothing.
In case of contact with eyes, immediately rinse with cold water for 15 minutes and immediately consult a doctor.

Download Non toxicity Certificate

Here is a new video from Steve who made some tests of our silicones –

How to mould and make your own resin handles –

 

Посмотреть эту публикацию в Instagram

 

Публикация от EPOXY RESIN (@resinpro_uk)

TECHNICAL DATA

“PURE MOULD” – 13 Shores

• Demould time: 4H
• Colour Part A: Translucent
• Colour Part B: Translucent
• Mix ratio: 1:1
• Pre-catalyst mixing viscosity: 4500 +/- 500 cP
• Mixing time at 23°C (73°F): 1 ‘
• Working time at 23°C (73°F): 40 ‘- 50’
• Demould time at 23°C (73°F): 180 ‘
• Shore A hardness after 24 hours: 13 +/- 2 ShA
• Hardness: 13 shore A (Shores – Higher values indicate higher hardness, lower – softer mould you get.)
• Ultimate tensile strength: 3.0 +/- 0.2 N/mm²
• Elongation at break: 450 +/- 20%
• Tear resistance (Die B): 14 +/- N/mm
• Tear resistance (Die C): 9 +/- N/1mm
• Platinum based

Note: Do not use above 30°C [86 F]. For more safety information, please carefully read the Safety Data Sheet of all ingredients.

“PURE MOULD” – 20 Shores

Translucent Colour: Monitor every detail while pouring.
Shore A Hardness 20±2:Ideal for sculptures, artistic castings, and dimensionally accurate models.
Balanced Elasticity: Easy demolding, even with complex geometries, without compromising the model’s integrity.
High Dimensional Stability:Minimizes shrinkage (<0.05%) for consistently precise and professional results.
Easy to Use: 1:1 mixing ratio, with 30–40 minutes of working time and full cure in just 3–5 hours.

PURE MOULD” – 30 Shores

Translucent Colour: Optimal visibility for precise casting.
Shore A Hardness 30±2: Ideal for heavy materials like concrete and plaster.
Enhanced Rigidity:Provides stability and durability for complex designs.
Chemical Resistance:Suitable for resins, solvents, and industrial environments.
Ease of Use:1:1 mixing ratio, 30–40 minutes working time, and full curing in 4 to 6 hours.