“CARBON POLISH” – Polishing Cream For Dark/Black Surfaces – Professional Polishing Paste for Resins & Carbon Fiber

£13.85

(Inc. 20% VAT)

(£11.08 - Exc. VAT)

Out of stock

Notify me when the item is back in stock.

Carbon Polish Black (250ml) is the defined product for polishing your carbon, dark or black surfaces.

The aesthetic and economic value of the carbon product is high, and for this reason it is essential to treat the surface with specific and dedicated products, which enhance the beauty of the “carbon look”. It is important to avoid “generic” products that can spoil the work done, with insufficient gloss or even worse, fail to remove scratches.

EASY TO APPLY AND REMOVE

  • MISCIBLE WITH WATER
  • ODOURLESS
  • DOES NOT WHITEN PLASTIC PARTS
  • DOES NOT CONTAIN SILICONES
  • VERY LOW ENVIRONMENTAL IMPACT

The carbon polishing paste Carbon Polish Pro Black has been developed in a black colour precisely to ensure a brilliant finish and without white dots, typical of generic abrasive pastes. It can therefore be used for all dark surfaces (especially resin).

Carbon Polish Black (250ml) is the defined product for polishing your carbon, dark or black surfaces.

The aesthetic and economic value of the carbon product is high, and for this reason it is essential to treat the surface with specific and dedicated products, which enhance the beauty of the “carbon look”. It is important to avoid “generic” products that can spoil the work done, with insufficient gloss or even worse, fail to remove scratches.

EASY TO APPLY AND REMOVE

  • MISCIBLE WITH WATER
  • ODOURLESS
  • DOES NOT WHITEN PLASTIC PARTS
  • DOES NOT CONTAIN SILICONES
  • VERY LOW ENVIRONMENTAL IMPACT

The carbon polishing paste Carbon Polish Pro Black has been developed in a black colour precisely to ensure a brilliant finish and without white dots, typical of generic abrasive pastes. It can therefore be used for all dark surfaces (especially resin).

 

Carbon Polish Pro Black is the specific paste for carbon; black colour prevents residues from remaining visible on surfaces after polishing.

Thanks to the NAP (Nano Abrasive Particles) it is a 2 in 1 product; in fact it quickly removes scratches and defects from the surface and gives at the same time a deep shine like only a polish can do.

 

In addition, its Synthetic Polymers allow you to correct and fill all the imperfections on the surfaces of Resin and carbon fiber artifacts.

 

Eliminate scratches, defects and mirror shine with a single product!

 

Carbon Polish Pro Black carbon polishing paste can be used both on the painted carbon and directly on the epoxy resin that covers the carbon fibers. Unlike commercial Polishes, Carbon Polish Pro Black is 100% Made in Italy, born from over 50 years of tradition in polishing. It allows both the hobbyist and the professions to obtain performing results quickly and easily.

Here are the simple steps to polish or eliminate blemishes from your carbon fibre surfaces:

If you need to use glass paper to remove the deepest scratches, you can do so without hesitation. The polishing paste will then be able to remove the sanding marks and make the surface smooth and shiny.
Here’s how:-

The polishing paste Carbon Polish Black can be used by hand with extreme simplicity, with the help of a microfiber cloth or a foam pad. Or it can be used with electric tools, such as a drill and flexible, equipped with a special shepherd and foam pad (8000-12000 rpm) or with a polisher (1000-2000 rpm both rotary and ro orbital) with foam pad or wool (also synthetic). The use of tools of this kind will speed up the maintenance and ensure optimal results in even faster times.

 

How to prepare the surface to be polished?

Here are the tricks to make the most of NAP (Nano Abrasive Particles) technology:-

 

Removals defects and scratches from sanding

Depending on the depth of the scratch/defect, start with abrasive papers grit 800-1000 (for deep scratches) or simply 3000-4000 (for light scratches), always tend the surface wetted with water (this will help to make the result homogeneous)

Apply the polishing paste for carbon fiber on the surface and spread it with circular and more or less energetic movements depending on the defect you want to remove. Or by directly attaching the buffer of the polisher / hose. We recommend one / two drops of carbon polishing paste every 3-4 cm.

You can apply it several times thanks to synthetic polymers, without risking consuming the carbon, until the result is perfect.

Clean up simply with water and a clean cloth. Put on your sunglasses and enjoy the dazzling result!

Surface renewal:

The product is also suitable as a fast and effective tool to renew your precious carbon surfaces, which wear out with normal use or exposure to atmospheric agents.

In this case, the process is even easier: it is sufficient to apply the paste on the surface (well cleaned) and roll it out with circular movements, or by directly applying the buffer of the polisher / flexible.

 

We recommend one / two drops of carbon polishing paste every 2-3 cm.

 

The carbon polishing paste Carbon Polish Pro Black has been developed in black colour precisely to ensure a brilliant finish and without white dots, typical of generic abrasive pastes, and can therefore be used for all dark surfaces (especially resin).

The special formula is free of volatile silicones and is therefore not harmful to health; it can also be used in painting processes.

Suggested products for you

Frequently bought together

Notify me when the item is back in stock.