“Epoxy Polish” – Epoxy Resin Polishing System

💥 About

Bring back the flawless shine of your resin projects with EPOXY POLISH – Epoxy Resin Polishing System. This high-performance polishing cream is expertly formulated for epoxy resin and similar materials, easily removing fine scratches, dullness, and imperfections to restore a brilliant, mirror-like gloss.

💡 Key Benefits

• Professional-Grade Polish – Removes micro-scratches with ease, resulting in a deep shine 🪞
• Anti-Hologram Formula – Ensures no swirl marks are left behind 🌟
• Multi-Surface Compatibility – Perfect for resin, carbon fibre, plastics, and dark surfaces 🖌️
• Easy Application – Can be applied manually with a soft cloth or used with polishing pads for excellent results 🎉

☝🏽 Useful Information

• Fast and Clean Application – Minimal effort for maximum results.
• Safe and Highly Effective – A trusted solution for artists and professionals.
• Made in Italy – Trusted by thousands of resin artists since 2015.

🎯 Who It’s For

• – Resin artists and crafters
• – DIY enthusiasts and hobbyists
• – Professionals in crafting and restoration

Suitable for small projects like jewelry and coasters or larger surfaces such as countertops, EPOXY POLISH guarantees professional results every time. For ultimate finishing, pair the cream with our complete polishing kits for all your resin polishing needs. Bring your resin projects to life with EPOXY POLISH, ensuring a brilliant finish every time!

Instruction Manual: Mirca Abralon Pads + Polishing Cream Kit

Safety Precautions

• Wear protective gloves to avoid skin irritation.
• Use safety glasses and a dust mask when sanding.
• Work in a well-ventilated area.

Step-by-Step Polishing Guide

Step 1: Preparation

1. Clean the Surface:
   • Ensure the resin surface is free from dust, debris, and grease.
   • Use a soft cloth or isopropyl alcohol for cleaning.
2. Inspect the Surface:
   • Check for scratches, irregularities, or cloudy areas that need polishing.

Step 2: Sanding

Important: Always keep the pads and surface slightly damp during sanding to reduce heat and prevent dust.

1. Start with the 500 Grit Pad:
   • Gently sand the surface in a circular motion or back-and-forth.
   • Apply light pressure; let the pad do the work.
   • Wipe off the residue with a damp cloth.
2. Repeat with Finer Grits (1000, 2000, and 4000):
   • Move to the next grit only after the surface feels smoother.
   • Continue sanding progressively to refine the finish.

Step 3: Polishing

1. Apply the Polishing Cream:
   • Place a small amount of ResinPro Polishing Cream onto a microfiber cloth or a buffing wheel.
   • Spread it evenly over the surface.
2. Polish the Surface:
   • Use a circular motion to buff the surface.
   • If using a buffing wheel, keep the speed low to medium.
   • Continue until the surface becomes glossy and smooth.
3. Wipe Off Excess Cream:
   • Use a clean, dry microfiber cloth to remove residue.

Step 4: Finishing

1. Inspect the surface under good lighting to ensure a uniform finish.
2. If necessary, repeat the polishing step for extra gloss.

Tips for Best Results

• Keep the pads damp but not soaking wet.
• Sand evenly without skipping grit levels for a smooth transition.
• Avoid over-polishing to prevent overheating or damage to the surface.

Care and Maintenance

• Wash the Abralon pads after use with water and mild soap. Allow them to air dry.
• Seal the polishing cream tightly to prevent it from drying out.

FAQs
“EPOXY POLISH” – Resin Polishing Kit – Cream & Pads:

Q: Can I use this kit on other materials like wood or metal?
A: Yes, the Mirca Abralon pads and polishing cream work well on various surfaces but are optimized for resin.

Q: How often should I change the pads?
A: Replace them when they show signs of wear or lose effectiveness.