HEAT PRO Flexible Heat-Resistant Glossy Coating

💥 About

HEAT PRO is a top-tier flexible, heat-resistant glossy coating that offers superior protection for your surfaces. Ideal for epoxy resin projects such as tables, coasters, and frames, this product enhances and secures your artistic creations, ensuring they remain stunning and durable.

💡 Key Benefits

• Scratch and Heat Resistance: Protects surfaces up to 200°C for lasting beauty. 🔥
• UV Protection: Prevents yellowing and keeps your projects looking fresh. ☀️
• Easy Application: Simple 100:75 mixing ratio; no need for additional additives. 🧪
• Self-Leveling Glossy Finish: Achieves a professional look effortlessly. ✨

☝🏽 Useful Information

• Full Curing Time: 72 hours for ultimate scratch and heat resistant finish.
• Application Limitations: Apply only on dry surfaces and not compatible with acrylic dyes.

💥 Important Things

• Apply only on perfectly dry surfaces without traces of moisture.
• Not compatible with acrylic or liquid dyes: we strongly do not recommend using this product with acrylic artworks!
• The product should be applied only on transparent resin surfaces (without dyes). If applying on colored resin or other materials (wood, concrete, stone, etc.), create at least one 1mm layer of clear resin beforehand. Wait 24-48 hours and then apply Heat Pro.
• Maintain a correct room temperature above 20°C for all processing steps. Heat Pro must have a temperature above 20°C; if unsure, warm the cans slightly in a warm place for a couple of hours.
• The product is ideal for application on small surfaces, not exceeding 0.25 square meters.
• Use a heat source carefully to eliminate bubbles; pass the torch or hairdryer only briefly (max. 2 seconds) over each area to avoid damage to the finish.
• The hardened Heat Pro coating will have a softer texture than classical resins, guaranteeing maximum performance! For this reason, the coating cannot be sanded and polished.
• The hardened Heat Pro coating becomes resistant to hot objects and scratches only 72-96 hours after application!
• You can store objects covered with Heat Pro in a “stack” only through paper or cloth. In no case should such products be stacked on top of each other without this protection as the coating may stick together tightly!

🎯 Who It’s For

• – Resin artists and DIY crafters
• – Home decorators and designers
• – Hobbyists looking for durable finishes

Elevate your resin art projects with HEAT PRO, providing peace of mind through its robust protection and stunning finish.

TECHNICAL DATA

“HEAT PRO” – Flexible Heat-Resistant Anti-Scratch Glossy Coating:

• Mix ratio: 100:75 by weight
• Pot-life: (150 gr at 30°C): 24h
• Full catalysis: 24-72h
• Film catalysis: (20°C): 3h
• Demoulding time: 20h
• Maximum pouring level: 2.5mm
• Minimum pouring level: 1.5mm
• Viscosity: 25°C Pa: A: 0.6-1.0 B-0.2-1.2
• Density: g/cm3: A: 1.2-1.3 V-0.95-1.20
• Hardness: Shore D 80-85
• Coverage 1kg: 100*60*0.15cm
• 1sqm consumption (1.5mm thickness): 5kg

Download SDS (Part A)
Download SDS (Part B)
Download TDS

💥 HOW TO USE. MIX RATIO BASED ON WEIGHT – 100:75

• Use adequate personal protective equipment.
• For best results, measure two components based on weight using a scale within 5% of the recommended mix ratio.
• Always mix the product thoroughly for at least 3 minutes, scraping all the surfaces of the container to ensure complete mixing.
• Try to use the product in a temperature-controlled environment within the optimal product specifications.
• Avoid high humidity or low ambient temperatures.
• Ensure that the surface is dry and any dirt, dust and oils removed to achieve optimal bonding. It is furthermore highly recommended to sand the surface (with sandpaper or mechanical preparation).
• Perform small preliminary tests to have a clear understanding of the polymerization features of the resins in your work environment and the compatibility of the resins with other materials.

HEAT PRO is a transparent, two-component polyurethane resin, ideal for protecting your creations. Here are all the tips for correct application!
It is very important to have the correct room temperature, above 20°C for all processing steps.
Heat Pro must have a temperature above 20°C, so if you are not sure if the temperature is right, warm the cans slightly by keeping them in a warm place for at least a couple of
hours.

The product is ideal for application on small surfaces, not exceeding 0.25 square metres.

Apply only to perfectly dry surfaces. Not compatible with acrylic or
liquid dyes.

The product must be applied as a final coat (1-3 mm) on a transparent resin surface (without dyes). Do not apply directly on wood, concrete and stone (unless first treated with transparent resin)

If you want to apply on coloured resin or other materials, apply at least a 1 mm layer of clear resin beforehand.

Wait 24-48h and apply Heat Pro.
Use a heat source to eliminate bubbles however, be careful to pass the torch or hairdryer only briefly (max. 2 seconds) over each area to avoid damage to the finish.

The special scratch and heat resistant finish will have a softer texture than classical resins: this specific texture will guarantee maximum performance!

Your result will be perfect!

WARNINGS:
During processing, use protective masks, gloves, and other protective clothing.
In case of contact with eyes, immediately rinse with cold water for 15 minutes and immediately consult a doctor.

 FAQs
“Transparent” – Ultra Clear Multipurpose Epoxy Resin:

Q. What`s the proportions and how to calculate that?
A. The proportions of Transparent Epoxy resin is 100:75 – A:B by weight. You can always check that taking a look at the labels of the bottles – they are always printed there:)
For calculations we suggest using our app – GooglePlay & AppStore.
How to calculate, how much hardener do you need? Take your proportions –JUST AN EXAMPLE – 100:75. Then take the weight of component A and multiply on B, (if 100:60 – A*0.60; if 100:70 – A*0.70; if 100:87 – A*0.87).
So! If you have component A 5kg, and proportions 100:60, your calculation –
5*0.75=3.75kg of component B.

Q. Can I do 3cm per one casting?
A. Unfortunately:(
This resin is only for thing covering by 1.5mm and small areas.

Q. Why epoxy is murky?
A. Epoxy just become frozen during storage/delivery, etc. Please, don`t use that before you de-frost it fully, it may affect the result. Just put the component A into very hot water for 10-15 minutes. Repeat if needed.

Q. What`s the coverage of 1kg?
A. 1kg of mix epoxy+hardener covers area 50*45*0.4сm.
You can use our resin calculator here – 🔮LINK🔮
Or our app – GooglePlay & AppStore.

Q. What`s the volume 1kg resin+hardener?
A. 1kg epoxy resin ~ 0.9l
Just take the weight and divide at 1.1, you`ll get the volume in litres.

Q. Can I use epoxy at home?
A. Yeap, we recommend working in well ventilated area and use protective cloves and masks.

Q. What to use for colouring?
A. We don`t recommend colouring this resin, because it was made for transparent heat and scratch resistance layer.

Q. My layer didn`t set. It`s soft!!!
A. The layer has to be soft, because it`s a flexible type of resin, which helps to cope with high temperatures and minor scratches.