Bring the striking elegance of natural onyx into your home with the Exotic Onyx Effect Kitchen Top & Worktop Kit with Epoxy Resin. Designed to mimic the rich bronze, grey, and white veining of exotic onyx stone, this kit allows you to transform any countertop, island, or work surface into a durable, high-gloss masterpiece.

The premium crystal-clear epoxy resin ensures a smooth, glossy finish that highlights the depth and shimmer of the pigments. With carefully selected metallic powders and high-quality dyes, you can recreate the unique flowing patterns and dramatic contrasts of real onyx – all from the comfort of your own home.

Perfect for both DIY enthusiasts and professionals, this kit provides everything you need to achieve a sophisticated stone look that combines functionality with stunning visual impact.

Kits including: 

• Compact – Bathroom & Accent Surfaces (2.49 kg)

  Covers 1 m². Includes:

  • Art Pro epoxy resin 2.49 kg

  • 10 g white metallic pigment

  • 10 g bronze metallic pigment

  • 10 g grey metallic pigment

  • 50 ml white dye

  • 25 ml black dye

  • 250 ml isopropyl alcohol (for creating realistic marble veining)

  ---

  Classic – Small Kitchen Surfaces (4.15 kg)

  Covers 2 m². Includes:

  • Art Pro epoxy resin 4.15 kg

  • 20 g white metallic pigment

  • 20 g bronze metallic pigment

  • 20 g grey metallic pigment

  • 100 ml white dye

  • 25 ml black dye

  • 250 ml isopropyl alcohol

  ---

  Grande – Full Kitchen Surfaces (8.33 kg)

  Covers 4 m². Includes:

  • Art Pro epoxy resin 8.33 kg total

  • 40 g white metallic pigment

  • 40 g bronze metallic pigment

  • 40 g grey metallic pigment

  • 200 ml white dye

  • 50 ml black dye

  • 250 ml isopropyl alcohol

  ---

  Majestic – Kitchen & Island Surfaces (16.6 kg)

  Covers 8 m². Includes:

  • Art Pro epoxy resin 16.6 kg total

  • 80 g white metallic pigment

  • 80 g bronze metallic pigment

  • 80 g grey metallic pigment

  • 400 ml white dye

  • 100 ml black dye

  • 250 ml isopropyl alcohol

TECHNICAL DATA

“ART PRO” – Epoxy Resin For Artists & Surface Coating – Medium Viscosity:

• Mix ratio: 100:66 by weight
• Pot-life: (150 gr at 30°C): 24h
• Viscosity: Resin – 800mPas; Hardener – 300mPas; Mix – 500-700mPas
• Full catalysis: 24-36h
• Film catalysis: (1.5 mm at 30°C): 6h
• Demoulding time: 14h
• Maximum pouring level: 1.5-2cm*
• Minimum pouring level: 1.5mm
• Hardness 3-5 days after application: 80 Shore D
• Coverage 1kg: 100*60*0.15cm
• 1sqm consumption (1.5mm thickness): 5kg

* – may vary from the pouring`s conditions (please, read below)

To obtain a cellular effect we recommend using the “Resi-Blast” additive or alcohol-based inks (“Pinàta”, “Jacquard” etc.).
If you have not enough experience, we insistly suggest to make a small test before working with large project.

Download SDS (Part A)
Download SDS (Part B)
Download TDS

Step 1 – Primer

1. Mixing

• Calculate the amount needed at 150 g per m².

• Mix resin and hardener according to the recommended ratio until homogeneous.

• Add white or black pigment (max 5% by volume).

2. Surface Preparation

• Sand with coarse grit (40–60).

• Clean thoroughly with a soft cloth or brush.

• Ensure the surface is completely dry.

3. Application

• Apply a thin, even layer with a brush, roller, or spatula.

• Allow to dry for ~12 hours (longer if humid or cold).

• Avoid touching the surface during curing. Minor surface irregularities will level out during the main pour.

Step 2 – Resin Application

1. Setup

• Apply masking tape around the perimeter.

• Pour rate: ~1.6 kg resin per m².

• Remove tape 1.5 hours after pouring (resin should be partially set).

2. Mixing

• Use a drill with paddle mixer (low speed) for 2 min or mix by hand for 4 min.

• Scrape sides and bottom halfway through.

• Divide into cups, add pigments, and mix each colour thoroughly.

3. Pouring

• Layer colours randomly into a larger bucket (do not over-mix).

• Pour onto the surface, keeping some resin for the edges.

• Remove air bubbles with a propane torch or heat gun.

4. Edges & Finish

• After tape removal, moisten dry edges with gloved hands for a seamless finish.

• Level edges with a spatula or scraper.

• Let cure for 24 hours.

• Optionally, apply a clear top coat or PoliShield scratch-resistant finish.

5. Optional Effect (Included IPA)

• Your kit includes 250 ml of 99.9% isopropyl alcohol for creating decorative lacy textures.

• Spray lightly over the resin just before it fully hardens for best results.

• STRICTLY Do not apply heat after using IPA.

Safety – Isopropyl Alcohol (99.9%)

• Highly flammable – vapors can ignite from sparks, flames, or hot surfaces.

• Never use torches or heat guns near IPA-treated areas.

• Work in well-ventilated spaces.

• Allow 5–10 min evaporation before applying heat to nearby areas.

• Keep IPA at least 2 m (6 ft) from heat sources.

• Store in a sealed container away from sunlight or heat.

• In case of fire: use CO₂ or dry powder extinguisher only — never water.