Why Did My Resin Panel Cure Sticky or Soft?

← Back to How to create a decorative resin panel?

Finding your resin panel sticky or soft after curing can be frustrating. This common problem usually points to a few avoidable mistakes during mixing or preparation. Understanding the causes and knowing how to prevent them is key to achieving a flawless, durable decorative resin panel.

What Causes Sticky or Soft Resin Panels?

Sticky or soft patches on resin panels most often result from incorrect mixing ratios or incomplete blending of resin and hardener. If the components are not measured out with care, or if the mixture is not thoroughly stirred—particularly at the sides and bottom of the mixing container—the resin may not cure as intended. Environmental factors, such as low room temperature or high humidity, can also slow curing. However, incorrect mixing is the primary cause.

Tips for Correct Mixing and Curing

• Measure precisely: Pay close attention to your resin’s recommended mixing ratio. For example, Art Pro resin uses a 3:2 weight ratio of resin to hardener.
• Stir thoroughly: Mix for several minutes, scraping the edges and bottom of your container with a spatula or stick.
• Mix at the right temperature: Most resins cure best at around 20–25°C in a dry, dust-free space.
• Follow thickness recommendations: Overly thick pours can delay or hinder curing. For panels up to 2cm thick, products like Trasparente or Icrystal resins are suitable choices for even results.

When This Matters

Getting the mixture right is critical for any decorative resin panel—especially those forming the centrepiece of a room, such as a clear-coated tabletop or art piece. Errors show up as blemishes or soft spots that affect both the look and lifespan of your project.

Related products

• "Art Pro" – Clear Epoxy Resin for Artists and Surface Coating
• "Trasparente" – Multipurpose Clear Epoxy Resin for Casting – Up to 2cm
• "Icrystal" – Clear Epoxy Resin – Odourless Formula – Up to 1.5cm

Related guides

• How To Create A Decorative Resin Panel

Ensuring your resin cures completely is an essential step in creating any decorative resin panel. With accurate measurements and careful blending, your next project should shine. For more guidance on perfecting your resin panels, see our main guide on how to create a decorative resin panel.