Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How to make resin for filling cracks?
Getting a flawless finish while filling cracks with resin is all about technique. Pouring resin too quickly can result in unwanted air bubbles, which weaken repairs and spoil the look. Here’s how to avoid these common pitfalls.
Why Slow Pouring Matters
Moving slowly when pouring resin gives trapped air time to escape, preventing bubbles from forming inside cracks. Epoxy resins like “Trasparente” and “Icrystal” are designed to self-level, but only careful pouring ensures the resin fully occupies narrow gaps. Rushing this stage may trap air along the crack walls, leading to unsightly voids or weaker fills.
Best Techniques for Pouring Resin Into Cracks
- Prepare the Surface: Make sure cracks are clean, dry, and free from dust for optimal adhesion.
- Mix and Rest: Mix the two-part resin thoroughly. Let it rest briefly to allow larger air bubbles to rise and pop.
- Controlled Pour: Begin pouring the resin slowly at one end of the crack, letting it flow naturally. Aim to keep a consistent stream—don’t dump the resin in quickly.
- Use Tools for Precision: For fine cracks, use a squeeze bottle or syringe to direct the resin where needed.
- Release Any Remaining Bubbles: Use a cocktail stick or gently blow across the surface with a heat gun to encourage trapped air to rise and disperse.
When This Matters Most
Slow, careful pouring is especially important for deep or narrow cracks, or when using ultra-clear resins where bubbles will show. It’s also crucial for restoration work, such as filling voids in wood or repairing furniture, where durability and a smooth finish are essential.
Related products
Related guides
Mastering a slow-pour technique prevents air bubbles and ensures sturdy, attractive repairs. For further guidance on selecting the ideal epoxy and mixing ratios, visit our full guide on how to make resin for filling cracks.