How to Tackle Deep Scratches in Epoxy Resin Tables

Stepwise Sanding for Deep Scratches

When you encounter deep scratches, begin by sanding with a lower grit—such as 360 or 500—to effectively remove the damaged layer. Use sanding pads like the Ebonite Abralon Sanding Pads, choosing a grit appropriate for the severity of the scratch. Work evenly and check your progress regularly.

Once the scratch has been levelled, gradually progress through higher grits (for example: 800, 1500, then up to 4000) to eliminate sanding lines and smooth the finish. Using a compatible interface pad can help maintain even pressure and avoid accidental gouging during each stage.

Polishing for a Glossy Finish

After sanding, polishing brings back the shine. Apply a dedicated resin polish such as Epoxy Polish with a soft pad, working the product thoroughly into the surface. For the best gloss, a mechanical rotary polisher or pad holder is recommended, as clean cloths alone may not be sufficient to achieve a mirror effect.

• Ensure all polish is fully worked in to prevent a cloudy finish.
• Work in small sections, maintaining steady pressure but avoiding overheating.

When This Method Matters

This progressive approach is especially important when scratches are too deep to be removed by light buffing or when the clarity of your table’s surface is essential—for example, on statement dining pieces or high-traffic coffee tables. Following the correct process minimises the risk of introducing new imperfections and ensures a pleasing, durable finish.