Which Surfaces Are Suitable for Prolux Coating?

Compatible Surfaces for Prolux

Prolux polyurethane coating can be applied to a range of surfaces commonly found in garages and commercial areas. These include:

• Concrete: Typically used for garage floors, provided the surface is stable and clean.
• Fibreglass: For specialty zones or walls.
• Ceramic and Tiles: Ideal for areas upgraded from tiled floors, as long as the tiles are secure and degreased.
• Plastic and Properly Prepared Steel: Suitable when these substrates are abraded, degreased and primed for resin adhesion.

This broad compatibility allows users to refresh anything from standard floors to more tailored workspaces; however, good preparation remains essential for success. For best adhesion on tricky surfaces, consider a dedicated primer such as Epoxyprimer on tiles or screeds before applying Prolux.

Surface Preparation Tips

To ensure a lasting and resilient finish, each surface must be thoroughly prepared:

• Clean thoroughly: Remove oil, dust and previous coatings.
• Dry and stable: Ensure no rising moisture or loose areas.
• Mechanical preparation: Abrade dense or glossy surfaces and fill visible cracks.

Following these steps reduces the risk of delamination, especially on more challenging substrates like ceramic or metal.

When This Matters

Using Prolux is ideal for spaces where a tough, easy-clean and weather-resistant surface is needed. This is especially relevant in garages, workshops and driveable areas, or wherever surfaces face heavy use and occasional exposure to oil, chemicals or sunlight.