Accurate pouring in small molds

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Accurate pouring in small molds

Accurate pouring in small molds is crucial to achieve high-quality results in the production of resin or silicone components. To ensure uniform distribution and prevent air bubbles, it is advisable to use precise and controlled dosing tools. Additionally, paying attention to the viscosity of the material to be poured and the ambient temperature is important to guarantee proper fluidity and optimal solidification. Another useful practice is the use of degassing agents or vacuum chambers to eliminate any impurities and enhance coating adhesion. With care and precision during the pouring process, high-quality results can be achieved in DIY projects.

- Epoxy resin pouring for small molds

Pouring epoxy resin for small molds is a fundamental process for creating detailed and high-quality objects. To achieve optimal results, it is important to carefully follow some steps:

1. Preparation: make sure that the model and the container are clean and free of dust.
2. Measurement: accurately measure the resin and the catalyst following the recommended ratios.
3. Mixing: thoroughly mix the two components for at least 2-3 minutes, avoiding the formation of air bubbles.
4. Pouring: slowly pour the resin into the small mold, trying to evenly cover all the details.
5. Curing: allow the resin to dry for the necessary time indicated on the product. By carefully following these steps, perfect and defect-free small molds will be obtained.

- Epoxy Resin Pouring Techniques (2)

Mastering epoxy resin pouring techniques is crucial to achieve high-quality results in DIY projects. Here are two common methods used by hobbyists and artisans:

1. Single-layer pouring: ideal for creating smooth and uniform surfaces without any lifting or air bubbles. It is recommended to pour the resin slowly and steadily, evenly distributing it on the surface.
2. Layered pouring: perfect for more complex projects or adding decorative elements. This involves pouring the resin in multiple stages, allowing each layer to dry before applying a new one. By following these techniques, flawless finishes can be achieved in resin coating projects.

- DIY Epoxy Resin Pouring (3)

Pouring epoxy resin as a do-it-yourself project is a creative and enjoyable process to create unique and personalized objects. Firstly, ensure you are in a well-ventilated area and wear the necessary protective gear. Prepare the resin by carefully following the manufacturer's instructions and mix thoroughly to avoid air bubbles. Pour the resin into the designated mold, add colors or inserts if desired, and let it cure according to the specified times. Once solidified, carefully remove the object from the mold. Lastly, remember to clean the tools meticulously for future reuse.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85