Avoid Trapped Moisture in Transparent Resin Flooring

Why Moisture Control Matters

Moisture trapped under resin flooring can cause discolouration, bubbling, or poor adhesion between layers. Resin is impermeable when cured, so any water left in the substrate or introduced during application may become permanently sealed inside, leading to unsightly results and even damage over time.

Key Steps for Preventing Trapped Moisture

• Check the Substrate: Make sure concrete or other bases are completely dry before application. If in doubt, use a moisture meter to check dryness.
• Apply in Suitable Weather: Avoid installation during high humidity or after recent rain. Always follow the product’s guidance for temperature and humidity conditions to ensure a reliable cure.
• Use Breathable Primers: Certain primers, like Resinstone, both seal and allow residual moisture to evaporate, reducing the risk of trapping damp beneath resin layers.

Practical Tips for Resin Floor Installation

After selecting the correct resin system for your requirements, always read the full instructions before starting. Lay out materials in advance, wear protective gloves, and only mix as much product as you can apply within the working time. For decorative or permeable floors, products like the Flowstone Kit offer detailed application guidance to support a successful, defect-free finish.