Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How do you apply washable resin on a floor?
To achieve a durable, washable resin floor, good preparation and proper product use are essential. Avoiding peeling and weak adhesion requires care at each stage for a reliable finish.
Thorough Cleaning Before You Begin
Start by removing dust, grease, old coatings, and any loose debris from the floor. Resin will not bond well to contaminated or uneven surfaces, so sweep and degrease thoroughly. If you’re working with timber, tiles, or concrete, make sure the area is dry and free from any oils or residues for the best possible base.
Priming for Superior Adhesion
Using a dedicated primer, such as the Epoxyprimer – Universal Water-Based Two-Component Epoxy Floor Primer, helps create a stable link between your floor surface and the resin layer. Primer is especially important for surfaces like concrete, wood, and tiles. Apply the primer evenly with a roller or brush, allowing it to cure fully (usually 24–48 hours) before moving on to resin application.
Mixing and Application Tips
Always use exact mixing ratios as specified for your resin products. Inaccurate measurements can cause weak spots or prevent proper curing, risking adhesion issues. For even, controlled application, opt for the right tools—short-pile rollers work well, especially for detailed or edge work. Take care not to leave the resin too thick or thin; an even layer promotes the best bond and finish.
When This Matters Most
Good adhesion is especially vital in areas with heavy use or frequent cleaning. Flaking or bubbling is more likely where groundwork is rushed or skipped, especially on complex or porous surfaces.
Related products
Related guides
With careful surface prep, proper priming, and the right tools, you can enjoy a washable resin floor that looks great and stands up to daily wear. For step-by-step advice on resin floor installation, visit our main guide on how to apply washable resin on a floor.