For Self-Levelling Decorative Protective Coats

How Much Resin Per Square Metre?

The ideal amount of self-levelling resin depends on the type and thickness of the decorative or protective coat you wish to achieve. For products such as Resinstone applied as a protective sealer for concrete floors or driveways, a theoretical coverage of approximately 40–60 grams per square metre is common. In cases where a thicker, visually striking finish is needed (as with glossy or design effects), resins like Heat Pro recommend about 1.2 kg per square metre at 1 mm thickness. Always refer to the specific product’s guidance, as some kits are designed for a precise area and offer clear coverage instructions.

Tips for Application and Surface Preparation

Start with a clean, dry, and absorbent surface, especially for concrete or driveways. Ensure the area is free from dust, grease, and loose debris. Using a primer may enhance adhesion and protection. Self-levelling resins should be spread evenly using a notched trowel or roller. Allow the resin to settle and avoid disturbing the surface during curing—in most cases, foot traffic is possible within 12–24 hours.

• Always mix components thoroughly according to manufacturer instructions.
• Work methodically and plan your pours for consistent thickness.
• Wear gloves and protect surrounding areas from drips.

When Precise Resin Calculation Matters

If your project involves distinctive design finishes or large continuous surfaces—think kitchens, garage floors, or decorative panels—accurate resin measurement becomes crucial to avoid interruptions and colour inconsistencies. Kits like the Stone Effect Collection are pre-measured by surface area, making planning for both beginner and experienced users much easier.