Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to how to level dry resin
Properly levelling dry resin surfaces is all about patience and care. Gradual sanding, combined with regular checks, helps achieve a flawless, even finish without unnecessary risk to your resin project.
Step-by-Step: Effective Gradual Sanding
Start sanding your dry resin surface with a coarser grit suitable for initial levelling. Work evenly across the entire area, using gentle pressure, then move to progressively finer abrasives. This stepwise approach prevents accidental scratches or gouges. For stubborn marks or edges, a scraper can assist with careful removal. Always sand in a controlled manner to maintain an even surface.
The Importance of Frequent Inspections
After a few passes with each grit, stop and thoroughly inspect both visually and by touch. Angle your work towards the light or use a straight edge to check for low spots or unevenness. Regular checks not only help you spot imperfections early but also prevent over-sanding and reduce the risk of damaging the resin layers.
Finishing Touches for a Glossy Result
Once the surface is consistently level and free from scratches, bring out the shine using a dedicated resin polish such as the Epoxy Polish System. Apply it with the recommended pad holder or rotary tool for best results. Polishing manually with a cloth often won’t generate enough friction for a high-gloss finish, so opt for proper tools where possible.
Related products
Related guides
A thoughtful approach to sanding and inspection is key to achieving a professional, level resin finish. For further tips on achieving perfectly smooth results, visit the main guide on how to level dry resin.