Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How to make resin for filling cracks?
Even a perfect resin mixture can be spoiled by unwanted bubbles when filling cracks. With the right approach, it’s straightforward to achieve a smooth, clear result free from trapped air.
Mixing and Pouring Techniques to Reduce Bubbles
Start by mixing your epoxy resin slowly and steadily. A rapid or vigorous stir draws air into the mixture, which then forms bubbles. Instead, use a gentle, deliberate action and scrape the sides and bottom of your mixing container to ensure thorough blending without excess agitation.
When pouring, do so in thin layers rather than filling deep cracks all at once. Pouring in stages allows air pockets to rise and escape before the resin begins to set. For most craft, furniture, or restoration projects, a controlled, staged pour produces a crystal-clear finish.
Removing Bubbles Before the Resin Sets
After each pour, closely inspect the surface and any visible bubbles. A quick pass of a heat gun or small torch held above the surface can draw bubbles to the top and pop them gently. Take care not to overheat the resin or surrounding material. For tiny persistent bubbles, lightly touching them with a toothpick or pin works remarkably well.
If you’re using an ultra-clear resin like “Trasparente” epoxy, these steps will help preserve its clarity and gloss, especially in visible repairs.
When Bubble-Free Results Matter Most
Minimising bubbles is especially important for projects where aesthetics and transparency matter, such as resin river tables, art pieces, or when filling cracks in furniture and woodwork. In these cases, a flawless, glass-like result is the mark of a quality repair or creation.
Related products
Related guides
Taking time to prevent bubbles makes a visible difference in any crack-filling task. For more advice on achieving seamless resin repairs, explore our full guide on how to make resin for filling cracks.