How do I prevent air bubbles in my filled engravings?

← Back to How is the resin applied to the pantograph engraving?

Air bubbles are one of the most common issues when filling engravings with resin, potentially spoiling an otherwise flawless finish. Careful preparation and the right techniques ensure your projects remain clear and professional.

Mixing and Pouring the Resin

The first step in avoiding bubbles is to mix your resin slowly and gently, minimising agitation. Stir in a steady motion, scraping the sides and bottom of your container to ensure a uniform blend without trapping excess air. When pouring into engravings, allow the resin to flow in slowly rather than dumping it in, which helps air escape as it settles. Using a low-viscosity resin such as Liquidissima Epoxy Resin can also support the resin in flowing easily and releasing air from tiny details.

Eliminating Bubbles After Pouring

Even with careful mixing, a few bubbles may remain after pouring. To remove them, use a pin or toothpick to pop visible bubbles on the surface or trapped in engraved details. For a more thorough finish, gently apply heat—such as with a heat gun or by quickly waving a small flame above the surface. Take care: too much heat can damage both the resin and the underlying material. For spreading resin evenly, consider a notched tool like the Tooth Shaped Spatula for Epoxy Resin Application, which creates uniform layers and further reduces trapped air.

When Air Bubbles Matter Most

• Bubbles are especially problematic in fine details or shallow engravings, where even a small imperfection can be noticeable.
• If your piece will be used for jewellery or decorative art, clarity is key; removing all visible air improves the professional appearance of your project.

Related products

• "Liquidissima" – Epoxy Resin For Creations & Jewellery
• Tooth Shaped Spatula for Epoxy Resin Application
• "Fairy Wings" – UV Resin for Volumetric Reliefs, Dual Colour, 30ml

Related guides

• How Is The Resin Applied To The Pantograph Engraving

With careful mixing, the right resin, and attention to detail, you can achieve bubble-free resin fills in your engravings. These steps are integral to the broader methods of resin application on engraved surfaces. Explore more tips on the parent guide to perfect your pantograph engraving techniques.