Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to How do you polish camper resin?
Cloudiness after polishing camper resin can leave your project looking dull or unfinished. With attentive preparation and the right products, you can achieve a consistently clear, glossy result.
Preparation: Sanding and Cleaning Are Key
The most common cause of hazy or cloudy resin after polishing is incomplete sanding or lingering residue. Start with a gradual sanding process, using pads suited for resin surfaces, such as the Ebonite Abralon Sanding Pads. Work up progressively to finer grits—making sure no coarse scratches remain on the surface. Always clean thoroughly between each sanding step to remove dust, using clean microfibre cloths and, if possible, a gentle rinse. This meticulous prep ensures no trapped particles will mar your finished shine.
Choosing and Applying the Right Polish
The clarity of your final result often depends on the polish and the method. For high-gloss results, use a system specifically made for resin, like the Epoxy Polish. Apply with a rotary polisher or a suitable pad holder to ensure even pressure and generate sufficient friction for a proper gloss. Buff the polish until fully worked in—rushing this stage can leave behind a milky appearance. Manual polishing with a soft cloth is possible for small areas but may be less effective than using a pad or machine.
When Cloudiness Matters Most
A few faint swirls might not show up in hidden corners, but for visible panels or camper surfaces, cloudiness is distracting and detracts from the overall look. Crisp, clear resin is essential for decorative or display areas, and is especially important after extensive restoration or custom work on your camper.
Related products
Related guides
By following careful sanding, cleaning, and thorough polishing, you will avoid the frustration of cloudy camper resin. For more in-depth steps and the full process, visit our main guide on polishing camper resin.