Free shipping on orders over £29,85 
Shipping Tracking! 
Google
Facebook← Back to how to make an epoxy resin table
Achieving a flawless epoxy resin table often comes down to your pouring method. Taking it slow, pouring resin gradually and in layers, is usually the key to preventing issues like overheating and bubbles, especially on larger or deeper tables.
Why Layering Matters
When working with epoxy resin, pouring too much in a single layer can generate excess heat. This may result in unwanted effects, such as discolouration, cracks, or deformation. Layering keeps the temperature lower, improving both clarity and structural stability. For most kits, such as the River-Table Complete Kit, the maximum recommended pour per layer is typically between 2cm and 5cm, depending on the product chosen.
How to Pour Resin in Layers
- Check resin instructions: Always refer to your chosen resin’s guidelines for the maximum thickness per pour.
- Allow each layer to cure: Pour the first layer, let it partly cure until it is firm but tacky. Then proceed with the next layer. This helps achieve strong adhesion between layers.
- Reduce bubbles: Work patiently and use a torch or heat gun as needed to help bubbles escape between each pour.
When Pouring in Layers is Essential
If your project’s depth exceeds your resin’s single-pour limit (such as more than 5cm), or you’re working on particularly wide or heavy projects, building up the surface layer by layer is the safest and most effective approach.
Related products
Related guides
Pouring epoxy resin gradually, in layers, ensures a professional finish for your table and minimises avoidable defects. For a comprehensive guide on every step of the process, visit our main how to make an epoxy resin table page.