How Thick Should Each Resin Layer Be in a Silo?

General Resin Layer Thickness Guidelines

Each resin system will have a suggested maximum pour thickness for best results. For most epoxy resins, this limit falls between 2cm, 5cm and 10cm per layer, depending on the product. Exceeding these guidelines may cause excessive heat build-up (exothermic reaction), potentially leading to imperfections or safety issues.

• For projects requiring up to 2cm per layer, consider “Trasparente” for its clarity and reliable curing.
• For deeper applications up to 5cm, “EpoxyTable 5-Five” offers enhanced heat management.
• Extremely deep pours, up to 10cm per layer, are best served by “Epoxytable 10-Ten”.

Practical Pouring and Curing Tips

Always read the product’s technical details before pouring into a silo or mould. If your project requires a greater total depth than your resin’s single-pour limit, pour in multiple layers, allowing proper curing time between each. Use measured, careful mixing and avoid pouring in warm environments to reduce the risk of heat build-up.

Following these steps helps achieve bubble-free, clear and reliable results for both artistic and functional applications.

When Thickness Matters

Layer thickness is especially important when casting into silos or deep containers—the wrong depth can lead to overheating, incomplete curing or cloudy finishes. Always respect the resin’s specified limits for your application’s safety and quality.