Industrial rust neutralizer

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Industrial rust neutralizer

The industrial rust neutralizer is a chemical product designed to convert rust into a stable form ready for subsequent protection or coating. This type of solution is widely used in the industrial sector to prepare rusted surfaces before the application of primers or protective paints. The rust neutralizer acts chemically on the oxidized layer, transforming it into a solid and adherent base for the subsequent treatment. This process helps to improve the adhesion of the coating and extend its lifespan, ensuring greater resistance to corrosion.

- DIY rust converter

The DIY rust converter is an effective solution for treating rusted surfaces quickly and inexpensively. Usually based on acids or phosphates, this product chemically acts on rust, converting it into a stable form ready to be painted. Before application, it is essential to thoroughly clean the surface to remove dirt and residues. Subsequently, the rust converter should be applied evenly and left to act for the time recommended by the manufacturer. Finally, the final painting can be carried out. This method is widely used in the restoration and DIY sector to restore rusted metal surfaces in a simple and fast way.

Rust Protection for Silicone Molds

Rust protection on silicone molds is essential to ensure their long-term durability. To prevent rust formation on silicone printed surfaces, it is advisable to use specific protective coatings. These coatings, based on special resins, create an effective barrier against moisture and oxidation, extending the lifespan of the molds. Before applying any coating, make sure to thoroughly clean the printed surfaces to ensure optimal adhesion. Additionally, it is recommended to follow the manufacturer's instructions and, if necessary, consult a professional in the field for effective rust protection on silicone molds.

**Rust Removal with Epoxy Resin**

Removing rust from surfaces treated with epoxy resin can be done by following specific steps:

1. Preparation: Wear gloves and eye protection.
2. Cleaning: Remove surface dirt with water and mild detergent.
3. Degreasing: Use a degreasing detergent to eliminate any grease or oil residues.
4. Sanding: Use fine-grit sandpaper to remove rust without damaging the resin.
5. Phosphoric Acid Application: Treat rusted areas with diluted phosphoric acid to neutralize the rust.
6. Drying: Allow the surface to dry completely before applying a new epoxy coating. By carefully following these steps, it is possible to effectively remove rust from epoxy resin surfaces.

Rust Treatment with Antioxidant Pigments

Antioxidant pigments are used in rust treatments to protect metal surfaces from oxidation. These pigments act as a barrier against moisture and oxygen, preventing rust formation and extending the lifespan of coatings. Commonly employed in epoxy resins and protective coatings, antioxidant pigments are an effective solution in the DIY sector to safeguard metal objects exposed to weathering agents. Thanks to their antioxidant properties, these pigments help maintain the integrity and aesthetics of metal surfaces over time, making rust treatments more durable and efficient.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85